Mr_Flintstone
Member
Anybody got a line on where to buy jacketed .30 carbine bullets? All my normal sources have dried up.
30 Carbine Bullets
- Thread starter Mr_Flintstone
- Start date
- Status
Random 8
Member
https://www.xtremebullets.com/30-CARB-110-RN-p/xc30carb-110rn-b0500.htm Plated, not jacketed. Best I could find
Edit. Just found these. Over 50 cents per, I would try the plated ones! https://nereloading.com/308-30-m1-carbine-110-grain-full-metal-jacket-250-pcs.html
Edit. Just found these. Over 50 cents per, I would try the plated ones! https://nereloading.com/308-30-m1-carbine-110-grain-full-metal-jacket-250-pcs.html
BigBlue 94
Member
V-max 110 gr. 10ring may have more, have to search
https://www.10ring.com/product/v-max-rifle-bullets/
Natchez SS bulk factory 2nds
https://www.natchezss.com/factory-second-rifle-bullets-30-cal-308-110-gr-hp-1700-ct-box.html
https://www.10ring.com/product/v-max-rifle-bullets/
Natchez SS bulk factory 2nds
https://www.natchezss.com/factory-second-rifle-bullets-30-cal-308-110-gr-hp-1700-ct-box.html
Swampman
Old Fart
Try Pat's Reloading.
http://www.patsreloading.com/patsrel3/Items.aspx?category=Bullets
110 grain Lake City FMJ's for $19.99/100 or $95.00/500
http://www.patsreloading.com/patsrel3/Items.aspx?category=Bullets
110 grain Lake City FMJ's for $19.99/100 or $95.00/500
OP
OP
Mr_Flintstone
Member
Interesting site. Have you ordered from here before?
Swampman
Old Fart
I've been dealing with Pat's for almost 20 years. I've always gotten a good count and (reasonably) fast shipping.
Their website looks like it was designed by a sixth grader in 1996, but they seem to keep their in stock status updated pretty well.
OP
OP
Mr_Flintstone
Member
Thanks. I’ll have to place a couple orders.
Yikes, at $.20 per, I'd try some plated. I've loaded these Berry's and didn't see any difference between FMJ with the same load of H110. At half the price.
https://www.berrysmfg.com/product/bp-30-carb-308-110gr-rn
Swampman
Old Fart
Personally, I shoot powder coated home cast out of a cheap Lee mold in my carbine, but the OP asked about jacketed.
Personally, I shoot powder coated home cast out of a cheap Lee mold in my carbine, but the OP asked about jacketed.
Which mold do you use, I'm thinking that's the way I'll end up going
GooseGestapo
Member
- Joined
- Jan 6, 2003
- Messages
- 6,154
I’m using the Lee 6-cavity 93gr .311” RN mold.
I’m powder coating with Harbor Freight Red and/or Yellow powder.
I size to .311” and load over 11.8gr of #2400 powder.
It shoots as well as anything else.
Also, Grafs has 110gr PPU FMJ in stock.
I’m powder coating with Harbor Freight Red and/or Yellow powder.
I size to .311” and load over 11.8gr of #2400 powder.
It shoots as well as anything else.
Also, Grafs has 110gr PPU FMJ in stock.
Swampman
Old Fart
I use the Lee .309" 120 grain round nose coated with Harbor Freight red.
Swampman
Old Fart
Just saw this and thought it might be of interest:
https://www.thehighroad.org/index.php?threads/wts-30-carbine-supplies-ky.898059/
https://www.thehighroad.org/index.php?threads/wts-30-carbine-supplies-ky.898059/
- Status
Similar threads
