Ever forget that you had bought something?

Status
Not open for further replies.
I do like having two die sets all set up for the calibers I load for so if something happens I can set that die set aside and continue on.
( stuck case, broken decapping pin)
But sometimes I buy another set thinking I need an extra and then I find my other set.
 
I recently opened a file cabinet drawer and found gallon bags of processed and primed brass, 38spl, 357mag, 44mag, 45acp, 243, 6.5gr, 6.5cm, 270, and 30-06, I was surprised and still don't remember filling that drawer. I found 2K 180gr 40 bullets in my cleaning bench I don't remember ordering (other side of the shop). this spring before we went to Talladega CMP I found 2 bags of clips for the Garand. I purchased 10 boxes of 6mm 100gr Sierra bullets and now I can't find them.
I need to organize my shop and start a spreadsheet (what kind of bed do those fit??)
 
My discovery of a previous purchase wasn't as dramatic...and rather than beng delighthed I was a bit miffed at myself. I bought a Hornady .223 Rem case gauge just to come home with something I needed, since my LGS didn't have any powder, primers, or projectiles. Since I have to drive 60 miles round trip I wanted something to show for my gas.
When I got home I put it in my loading tools drawer....right next to the Hornady .223 Rem case gauge that I'd just bought from Optics Planet a couple of weeks earlier.
 
In most cases I remember I have it the problem is finding it. I've looked for weeks for some items and end up ordering another 1. Then when the new one comes in I find mine. So now I have 2 of a lot of things.
Oh Heck Yes ... I'm glad it isn't just me ... I do that all the time !!!
You wouldn't believe how many cans of spray lube I found stashed in my house , garage and loading bld ...must be 40 cans ... why do I keep buying more ... I must have a "habit"... a spray lube monkey on my back !
Gary
 
Well, I just got done looking around Bass Pro since it’s on the way home from work - sort of - and they had AutoComp for $35/lb so I got some. I know I don’t have any cause I never tried it. They had IMR 4198 at the outrageous price of $48/lb. I know I got at least one pound so I’m skipping it. But I did get some #11 caps because it seems last I looked I was low. Now I can’t remember how long ago that was or if I bought some right away. So I might have a few thousand now or a few hundred. We’ll see.
 
I do like having two die sets all set up for the calibers I load for so if something happens I can set that die set aside and continue on.
I've backed off on the practice now that I load for so many cartridges that use the same shell holder, but I used to buy two shell holders whenever I bought a new set of dies - one shell holder went in the box of dies, and the other went in the shell holders "drawer" in my reloading tools cabinet. I still buy a shell holder whenever I buy a new set of dies even if I know I already have a shell hold that size in my reloading tools cabinet - the new shell holder goes in the new box of dies where it's "handy." ;)
 
Last edited:
I've backed off on the practice now that I load for so many cartridges that use the same shell holder, but I used to buy two shell holders whenever I bought a new set of dies - one shell holder went in the box of dies, and the other went in the die "drawer" in my reloading tools cabinet. I still buy a shell holder whenever I buy a new set of dies even if I know I already have a shell hold that size in my reloading tools cabinet - the new shell holder goes in the new box of dies where it's "handy." ;)

Mythbusters proved you can never have too many shell holders or sets of dies.
 
I alway make it a practice to buy as many 'smalls' parts for my rifles and handguns. You know, springs, pins, etc. The stuff that end up behind the washing machine.
After putting them in carefully marked parts envelopes I tend to forget about them since the parts don't fail or get lost for years, When something breaks I immediately go on the internet and order several new parts.....then later remember I have two spares in the envelope...oh well...now I have even more spares.o_Oo_Oo_Oo_Oo_O
 
Last edited:
I have similar stories as everyone else.

My favorite is we got evacuated because of wildfires 2 summers in a row. The first evacuation we only had a few hours notice so the primers and powder got thrown into large tubs with zero organization. Some of the stuff I never even unpacked from the first year. When I built my reloading room, it was like Christmas time.

Except for the dam Alliant rifle powder I couldn’t find, no matter where I looked.

Eventually I opened the tub at the bottom of the stairs in the garage looking for air filter cleaner. 14 lbs of various RL powders. I had walked within 2 feet of that tub hundreds of times and never opened it because it didn’t have powder in it.
 
"Ever forget that you had bought something?"
I haven't forgotten that I bought a stuck case remover way back when. But I have forgotten where it is - because just like most of those "just in case" items I've bought over the years, I've never needed it (yet). ;)
Those are a go to the garage and get the tap and die set. I just thread a 5/16 bolt in and remove it. My old CH single stage is nice for that.
 
Nope, not me. Unh-uh, never. Doesn't happen to this guy. Not even once.

If you believe that, you might be a good fit for the lead role in a new play I'm writing: Gullible's Travels.
George Strait will sell you some oceanfront property in Arizona!
 
I am usually in a position to forgot what I ordered or purchases when it comes to vinyl albums. I'm a collector, and have thousands of albums. It's almost impossible to remember what I already have when I get to the record store, and sometimes I buy albums that I already have. I've done this a few times.

With regard to reloading;
I'm currently re-opening my reloading bench that has sat idle since 2006. Most of the hardware (presses, dies and similar) for the bench were purchased in the early to mid 90s, so the hardware alone is beyond my recollection of purchase, and I was surprised to see what I had after all these years. In about 2002, I bought a bunch of brass, bullets, primers and powder. I mean a big bunch. As I'm going through my inventgory now, 16 years later, I am shocked at how much of some components I have. I probably have enough 9mm components to keep me busy for many months of reloading. Unfortunately, I sold my 9mm and 380 firearms over 10 years ago, so I'll probably have to get one 9mm handgun just to use the components up.

I have to start a spreadsheet for my inventory. Otherwise it's going to stay out of hand.
Get a table at a gun show and sell them for a reasonable price to new reloaders!
 
Status
Not open for further replies.
Back
Top