Can someone run this through their ballistics program?

Ardent · Jan 23, 2005

Hi folks, I'm using point blank and would like to double check the figures I'm getting in comparison to a "name brand" ballistics program. If you wouldn't mind going to the trouble with a program other than point blank, I'd be much obliged. What I'm after is only the total drop and velocity and ft-lbs remaining at 1000 yards with a target distance/zero of 250 yards, thanks!

Here's the load and data:

.243 Winchester

2950fps

105gr AMAX- BC .500

70 degress F

Target distance 250 yards

Scope height 1.5"

Thanks a lot!

JuniorG · Jan 24, 2005

see if this works

.243 (6mm) 105 GR A-MAX, 2950 ft/sec at muzzle, 250.0 yds zeroed.

Range (yds) 250.0 350.0 450.0 550.0 650.0 750.0 850.0 950.0
------------------- ----- ----- ----- ----- ----- ----- ----- -----
Bullet Height (in) 0.00 -8.67 -23.83 -46.61 -78.27 -120.18 -174.32 -242.59
Wind Drift @10.0 mph 4.09 8.28 14.10 21.81 31.60 43.60 58.11 75.28
Wind Drift @15.0 mph 6.14 12.42 21.16 32.72 47.40 65.39 87.17 112.91
Wind Drift @20.0 mph 8.18 16.56 28.21 43.63 63.20 87.19 116.23 150.55

Note: Wind is at 90Â° to the bullet path.

Ardent · Jan 24, 2005

JuniorG you're a life saver, thanks! My numbers are very close, so now I have confidence in point blank

ocabj · Jan 24, 2005

Use JBM

http://www.eskimo.com/~jbm/calculations/traj/traj.html

It's free for download, too, so you can run it on your own web server.

Can someone run this through their ballistics program?

Ardent

Member

JuniorG

Member

Ardent

Member

ocabj

Member

Similar threads