it looks like this 9x19mm-------2------ or like this 9x19mm-------?------
•
where it is from?
It will be loaded just like any other headstamp BTW
thanks in advance!
To me loading handgun ammo its plain simple, i just load to factory specs and shoot a variety of pistols.
In my experience the most accuracy and clean burn is at max of the loading chart, if I want a light factor load I use fast burning powders at max if I want hard hitting ammo just use slow...
I load the 150gr Lyman cast bullet (#356637) with 3.7gr of W231 at a OAL of 1,13", mixed headstamp and Wolf primers. No signs of pressure and really accurate, gives me 915 FPS from a CZ shadow and 890 FPS from a Tanfoglio Stock II so you get a Power Factor of 136 ;)
Hope this helps
Tumble your cases with walnut and Nu finish, the wax film prevents this issue.
I have to tumble all of my STM cleaned brass because of this, plus its retard oxidation and aid in easier extration
I also searched a lot about copper plating lead, you need to clean you bullets REALLY well to get the copper with enough adhesion to stay hold after firing(to make this easier just simply cast them an plate them at that moment), you need to wash them in fluoboric acid and the copper plate them...
What brass you were using? Some cases bulge more than others due case wall thickness, I like to use thin wall cases for oversized lead bullets like R-P and Speer. If I reload with jacketed bullets I prefer Win or Magtech (CBC) those have quite thick walls and ensure proper neck tension
If they...
Hi ! I would like to know how tall are the hills of a pistol and a rifle barrel since I have searched every place in the internet and nothing. My major concern its in a 9mm pistol barrel for what I understand every manufacturer has it owns standards when it comes to barrels but there must be an...
I cant find a reason why plated bullets should be less accurate than Jacketed ammo... After some really extensive load development I found that Plated are at least as accurate as Jacketed If The copper plating its decent (I think that 0.005" and above should be good) one of the most accurate...
Hk P30 I think ...
The one of the left doesn't seem to be that bad I would resize it and check
The one in the middle its dead as others said, I cant imagine how get that type of markings, maybe a bad chamber or a jam ?
First...by copper coated you mean copper plated right ? FMJ stands as Full metal Jacket, CMJ as Complete metal jacket and TMJ (total metal "jacket") the last one is name that Speer decided to give to there plated bullets which have a thick copper plate around 0.01" of thickness so they work with...
I know that I'm facing a huge risk trying this that's why I'm going to limit my components to the very less minimum possible, Ill start with just enough to fill 10 or so primer to be in a safer manner
Do you really think that making the priming mix using mercury fulminate its safer than...
Doug
you seems to have some knowledge about priming mixtures ... where did you work? Can you explain something more detailed about making priming mixture ? like where did you get the components? Cost of components ? How much mix would be necessary to blow my house?(not a joke) and if a make my...
I know the compotition of modern standard primer but to get the lead syphnate is quite difficult and more dangerous to make than I would like...
In fact I know a "survival" non corrosive priming mixture but I dont really know how to mix it yet ... (i know it need to be wet lol)
Yes those...
Update
the acetone make the gunpowder into a paste in a matter or seconds ! thanks for the data !
So far I have no luck to turn the paste into a hit and explode mixture ... this propriety is lost when I add the acetone and became a paste but maybe with other quantities I can get what I'm...
I´ll give a try to paint thinner because alcohol doesn't produce much of solvent proprieties after being in contact for 12 hours
As far as priming compound, here there is a Factory who sell brass washed steel primers with no paper to avoid humidity to get in the priming mix (the box also says...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.