Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Have this model coming in tomorrow so I can use it for the extended PA Flintlock season. Now I know that you use 4f (or 3f/2f) for the pan charge, but can you use (not 4f of course) it for the main charge? I see reference to loose powder, but I get the feeling that refers to pyrodex loose...
So what would people suggest are good donor models for a Short Barrel Shotgun? I guess I want something that a smith can easily work with, although some like [url=http://www.paladinarmory.com/SBSAOW.htm] can do works with everything from high ends to the Norinco and Turkish end of the spectrum...
I have a two new C&R firearms incoming. One is a 1941 Remington Model 81 in .300 Savage and the other is a ~1950s Remington Gamemaster Pump 760 in 35 Remington. The 760 is a freebie from a in-law and being left handed I can't complain and the Model 81 was a screaming deal I couldn't pass up...
Gerber Recalls Uppercut Knife and Sheath Sets Due to Laceration Hazard The Uppercut model sheath does not hold the knife securely, allowing the knife to come out of the sheath unexpectedly.
http://www.cpsc.gov/en/Recalls/2013/Gerber-Recalls-Uppercut-Knife-and-Sheath-Sets/
Seriously, this...
Seriously if you search for my threads in this sub forum, you'll see that this is I want to say 3rd Gerber product recalled in the 12-24 months (maybe even shorter).
http://www.cpsc.gov/en/Recalls/2013/Gerber-Recalls-Machetes-with-Stitched-Sheaths/
Has anyone had any luck with loading trail boss in either 158g or 180g flat point bullets? I don't mind using unique since 38 S&W isn't exactly recoil heavy anyway, but just kind of wondering if anyone does it. Was really happy to get a jug today, Trail Boss has been pretty hard to find. I was...
I have a small amount of powder, (50g-70g top) that I had to junk because I had a small amount of a different powder stuck in the hopper. Now I doubt any of the two mixed...but it's Unique and IMR-800X...not risking it. I live in an apartment, so I don't have a lawn per se, and when I have a...
I'm intending to use the minimum Unique Load for a 158gr LSWC. By pleasant dumb luck this was my initial bullet seating. Seem in range between the min for load listed by Lee and the max OAL for the cartridge.
In short I setup the Lee Perfect Powder Measure and I calculated out the required setting of 4gr of Unique is .4368. The amount given in the Lee Manual dealt with a rifle load that was 3.28. I was just wondering how do I set the device with a number that requires less than one unit.
I checked the Lee book and they had 158gr lead data, but not semi Wadcutter data, no luck with Hornady, Lyman has a mold #358665, but it doesn't look exactly like the one I have.
Now Alliant does list data for a 158 gr LSWC, but its from a Speer made bullet...
Hey,
I've always had an interested in the Thompson pistols chambered in wildly insane calibers...because the idea of a 30-06 pistol sounds pretty darn fun!
Now I'm kind of confused on what each product offers. I basically want something that has the strongest frame, though I guess it...
Just going to want to replace the bobbled hammer on a Cobra I'm getting and I want to know if it's something I can do or IIRC due to indexing issues, something that I should take to a smith?
Well in the battle to not be impulsive, being impulsive struck a major blow today.
I was in Kings Shooter Supply in their new location in King of Prussia PA last night (and actually I had noticed it the week before) and I decided to take a look at a Colt Cobra that was in stock. The gun...
http://en.m.wikipedia.org/wiki/.38-200#section_2
I have a Royal Hong Kong Police Colt Police Positive Special clambered in 38 S&W (yes despite being a special) on the way and I wanted to replicate the British ammo most likely used in the gun as much as possible. Does anyone have any suggestions...
I got a Glock 20 Gen 4 with 3 10 round Magazines from grabagun (no issues with them at all, hell they shipped SAME DAY). Now I've seen old threads about this and generally the suggestion is that the distributor is trying to screw you over and that Glock unless legally required doesn't sub locap...
Components will be
.401 sized 180gr Flat Point Bullets Rogers Better Bullets
CCI 300 Large Pistol Primers
Brass
New Starline Brass
Powders available
Blue Dot
Unique
IMR 800X
Platform will be a standard Gen 4 Glock 20
Thanks!
So by dumb luck today I was looking around on Grabaguns website and...well I have no clue how...I found a Glock 20 Gen 4 in stock with one left. Since I recently sold a gun and got paid right away I did only natural thing we would all do... I bought it for $563 shipped and $593 with my ffl fees...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.