1 and only 1911... willing to spend $1000+

[38 Super Fan]

i have seen folks on 1911forum getting them used for around $1,800 though

If you can find one at that price it's definately a great buy, a used one on GunBroker currently has a bid of $2400.

 

[Apocalypse-Now]

^^always overpriced on gunbroker LOL

gunbroker is a good reference though, just check the price on there, and assume the price is lower in the real world lol

 

[38 Super Fan]

^^always overpriced on gunbroker LOL

gunbroker is a good reference though, just check the price on there, and assume the price is lower in the real world lol

You can find good deals on GunBroker, it helps if you're very patient, I've gotten several good deals there.

 

[Apocalypse-Now]

^^that's true. i've got a relative that's found some good deals on there too. they are few and far between, though, like you said

 

[918v]

PS slide to frame fit is the most overrated trait in 1911s IMHO. It translates to less the 10% of total accuracy but people treat it like it is the end all be all. It is a decent indicator of overall fit and finish but for my money barrel to slide fit in lock up is much more important to accuracy.

Accuracy is not the only consideration when looking at slide to frame fit. How long will the accuracy remain with a sloppy slide fit?

 

[38 Super Fan]

^^that's true. i've got a relative that's found some good deals on there too. they are few and far between, though, like you said

As if on cue, excellent price on a Pro:

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=232858134

 

[Apocalypse-Now]

^^1,800 bucks, told ya! lol

man, wish i had some spare cash

 

[JROC]

I have a Colt Combat Elite with a few add ons, and I love it. It is a great shooting pistol. Very accurate, and reliable so far. I wanted a Colt, and I feel that it's a great looking gun. I think I paid about $940 for just the gun including shipping and dealer transfer fee's.

 

[38 Super Fan]

^You and me both, I just bought a Python on GB a couple days ago, so I'm out of luck on this Pro. FWIW, that seller has never sold a gunon GB, so I might pass if I had the cash anyway.

 

[Apocalypse-Now]

^^good call. no way i would buy a used gun from a first time seller. that's just asking for a headache lol


congrats on the python, best DA revolver trigger pull i've ever seen was on a python.

 

[rellascout]

Accuracy is not the only consideration when looking at slide to frame fit. How long will the accuracy remain with a sloppy slide fit?

The rear view of slide to frame fit does not = accuracy. Even if it is not super tight it will not amount to more than 10% of overall accuracy. That percentage will not change regardless of round count.

You have bought into an ascetic characteristic and mistake it for a accuracy characteristic. IMHO

 

[918v]

I'm not talking about the rear view of the slide. I'm talking about the amount of play between the slide and frame rails.

 

[lono]

My vote is for a doublestar 1911. They are just under 1200, have a forged frame and slide, match barrel and bushing. The best part is that they are produced by a small company in Winchester Kentucky. BTW I do own one and it is the most accurate handgun I have ever owned. I have put around 1000 rounds down range without any kind of malfunction.

http://www.budsgunshop.com/catalog/product_info.php/products_id/411542857

 

[38 Super Fan]

congrats on the python, best DA revolver trigger pull i've ever seen was on a python.

Thanks!

 

[ugaarguy]

A bit of a repeat, but I'll reiterate my thoughts from the "Best 1911 for the money thread" currently running. Just over $1k, I think Springfield Operators are a great value. Getting closer to $1.5k, while the SA TRP is quite nice, I think a $600 to $700 base gun with $700 to $800 of customization from top 1911 pistolsmith is far more gun for the money. Under $1k I've always been impressed withe fit and finish on every NM prefix Springfield I've handled or fired.

 

[Apocalypse-Now]

^^yep, the operators are awesome, especially for the money. mine as been more reliable than some of my glocks lol

 

[ugaarguy]

Yep, recently picked up a used, ANIB unfired LW full size operator for under $1k out the door. It's been nothing but rock solid. My beater 1911 is an early Kimber Classic Custom from before their quality went down hill. Those are great pieces, but they're getting a bit hard to find anymore.

 

[Skylerbone]

Colt Wiley Clapp. Who could argue with that purchase this year?

 

[Apocalypse-Now]

Yep, recently picked up a used, ANIB unfired LW full size operator for under $1k out the door. It's been nothing but rock solid.

cool yeah that's got the same frame as my champion operator, just longer barrel. mine's been stone reliable too. gotta love those operators

 

[Bill_G]

smith 1911

 

[DRYHUMOR]

Check out

http://www.chamberscustom.com/about-us

http://www.chamberscustom.com/gallery

Joe is beginning a new series called the WMG. Working Man's Gun, everything you need and nothing you don't. His plan is to build a couple a year.

Check out the groups in some of the gallery pics, those are 10 rounds at 50 yds.....IIRC
The target for my Springer 9mm after rebuild measures .920" for 10 shots at 50 yds.

For a 1 and only 1911, it would be a good choice.

 

[rellascout]

I'm not talking about the rear view of the slide. I'm talking about the amount of play between the slide and frame rails.

I understand what you are talking about but it still accounts for 10%or less of accuracy in a 1911. If it is out of spec and is battering itself to death that is a different issue. I'd it has a little play it is not the issue people make it out to be.

 

[Skylerbone]

Aparently with my 1911s the other 90% of accuracy comes from my dad holding them...;-)

 

[isc]

Buy a RIA for $400, replace the crappy grips ($20) and buy 4 or 5 top notch magazines ($80). Then take it to a good smith to do a trigger job on it ($100) and buy $400 worth of ammo to practice with.

You'll come out way ahead with a better gun and better skills.