Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

10 MM w/ Magnum primers

Discussion in 'Handloading and Reloading' started by 48 Months, Dec 1, 2010.

Thread Status:
Not open for further replies.
  1. 48 Months

    48 Months Member

    Joined:
    Oct 11, 2010
    Messages:
    1
    Hi, I reloaded 300 rds of 10 MM 155 gr Hornady XTC JHPs in various cases
    before I realized the CCI Primers were Magnum (350). Powder is 8 grains
    of Winchester Auto Comp Ball Powder. Hodgdon says I "should" be okay (doesn't give me a warm and fuzzy), but don't load anymore w/ Magnum 350's.

    Any one have experience w/ 155 grain bullets and Magnum 350 primers?
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    8.0 grains Autocomp is the recommended Starting load with a 155 grain XTP according to Hodgdon manual.

    Mag primers will not make one little bit of difference in a starting load.

    Shoot them.

    BTW: Loading mixed cases is going to make far more pressure difference between rounds then switching from standard to mag primers.

    rc
     
  3. Damon555

    Damon555 Member

    Joined:
    Jul 7, 2008
    Messages:
    829
    Location:
    The south
    Shoot 'em.
     
Thread Status:
Not open for further replies.

Share This Page