• You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.

100 gr .270 loads

Status
Not open for further replies.

Dolmar

Member
Joined
Dec 26, 2013
Messages
59
Just loaded some 100gr .270 win loads using 100gr Hornady SP loads and 50.5 grains IMR4895. Very happy with the grouping on this load. Can place a dime over the group at 25yds with room to spare.
 
To add to the above post, I'm hitting 3" high at 25yds with a rifle zeroed at 150 yds with 130 grain Corelocts. The 130 grain rounds are hitting 2" low at 25yds with a 1.5" group.
 
I've been running a 90 gr. HP with a near max charge of IMR-4350 for many years with excellent results. It's deadly on coyotes.

Try shooting those at 100 yds, that will give you a slightly better idea as to accuracy. 25 yds. doesn't do justice for a high powered rifle. The bullet hasn't even stabilized yet at 25 yds..

GS
 
I've been running a 90 gr. HP with a near max charge of IMR-4350 for many years with excellent results. It's deadly on coyotes.



Try shooting those at 100 yds, that will give you a slightly better idea as to accuracy. 25 yds. doesn't do justice for a high powered rifle. The bullet hasn't even stabilized yet at 25 yds..



GS


Shot it at a hundred and it hits pretty well, getting a group I can put a half dollar over. I think I can tighten that up a little though. I'll have to go back to the charge and see what I can do with it. I'm pretty new to this so the learning curve of discovery is fun.
 
Status
Not open for further replies.
Back
Top