2 New Firearms (Savage 64fxp & Stevens 200)

Status
Not open for further replies.

sojonojo

Member
Joined
Oct 29, 2011
Messages
16
Hello yall. I am back with some new firearms that I added to my collection. A semi-auto Savage Model 64fxp in .22LR and a Stevens Model 200 in .30-06 Spr. This is going to be a long post.....


I was at Big5 and had a good $320 to blow so I figured why not add a new firearm to the collection. Cant go wrong there right? Anyway I was there looking to see what I can get for my price range (turns out not a lot haha).


I was originally going to buy a Mossin Nagant but they were out of those and besides, they require a good amount of modification to make it what I like and I don't really like having to modify a brand new gun fresh out of the box. There is some immediate work needing to be done to the bolt and trigger. On top of that its like a musket; Its really long. And the buttstock feels like it was made for a little kid.


Only things I really like about it is that it is wood, it is easy to tear down, and the ammo cost. Then again the ammo is usually gummy as hell and leaves a ton of powder residue (if you are using normal ammo instead of military surplus, which is basically twice the price of the normal stuff).


So I gave up on the Mossin and was looking at maybe getting a nice shotgun for either home defense or turkey/coyote hunting under 50 yards. Unfortunately the only pumps they had in my range were a little tacky (stickers and rails) and were all single shot or single barrel and I would prefer a double barrel or chambered pump. They did have 1 that was in my price range but it was "after rebate" so I couldnt afford the initial cost of it. So I gave up on that idea as well.


Then I saw her, the Stevens Model 200. I had seen these before chambered in lower calibers like 223, 243, 7mm, and many many more. But never in .30-06 and that caliber has been on my to-get list for a while now. So I asked to check it out and I loved the smoothness of the bolt and the overall feel of the gun. Sure it is plain looking out of the box but I usually end up painting my guns anyway and I am somewhat familiar with its cousin (the Savage Model 110). So I just had to have it after getting it in my hands.


It was marked $299 and I asked the manager how much would it be with tax. Unfortunately I was just over $1 and some change short. I explained my situation to him and the manager actually gave me a discount on the gun! And on top of that it was the last one they had so I ended up getting the floor model. The manager actually took time out to really help me with this sale and I even came in about $5 under the $320 I had had. So $315 for the gun out the door and I was ecstatic about that. Couldn't be happier with my purchase and now I have a firearm I can use on virtually all North American game.


Maybe somewhere down the line I will end up modifying my 200. I hear there is a trigger package out there that makes the gun a lot better (or I can do a DIY job) and I have seen someone modify it a lot by adding a magazine and other stuff to it (cant remember right now)


I've actually had the Savage 64 for a little while now (like 2 months), just never posted about it. I purchased the Savage 64 for plinking and small pest control (pigeons and such). Not the best semi-auto out there but I love mine. I added a picatinni rail to it and plan on mounting a bipod or forward pistol grip in the near future. Just feels great not having to reload after every round. Unfortunately its only a 10 round magazine and the 20 round mags are extremely scarce. But for a cheap .22 it is nice and mine has only jammed using crappy subsonic ammo. The CCI and Federal ammo I can, and have, blast it all day with no problems.


All in all I am happy to add these 2 firearms to my collection and would recommend either to anyone looking for a nice, relatively cheap, firearm.

Pictures soon.....
 
Congrats sojo! ... and welcome to the forum. Sounds like you got two great shooters. 22lr helps you refine the mechanics of shooting, while having the greatest time while doing so! The 06 is a very capable round and will pretty much down any critter in North America.
Are you shopping for scopes yet! I have been very pleased with Weaver and Pentax, great quality at a reasonable cost. Good Luck. keep us posted.
 
I had a Savage 64 for about two years and 2000 rounds; I traded it for a Hi-Point pistol and feel like I got the better end of the deal.

The mag release is infuriatingly clumsy, there are ZERO aftermarket goodies for it and I had two different bolts works themselves loose (as in falling out of the rifle) in the first 100 rounds. It was unreliable. Sometimes it would go 200 rounds without any malfs and then choke on every other round for the next 200. Canadian gremlins or something, I dunno. Glad you got a good one and like it.

Gratz on the '06. The Stevens 200 is supposed to be a fantastic bargain.
 
Hello yall. Back with pics. I finally was able to go pick up some ammo and will be heading to the range soon. Gotta break this new gun in.


@tahoe2:

Yes I have been looking at scopes. I was going to go with UTG but may end up dropping some serious money on a nice Barska. Will check out what you suggested though, can always use a good deal.

I was also looking at adding a forward pistol grip to the 64 and a bipod to the 200. Both will get a scope. Not sure if I want to go all out and add a side-attached flash light and/or laser dot. I have the space on the picatinny rail so I could. Just trying not to make it to heavy.


@DeadFlies:

Unfortunately someone has to get that lemon eventually. Not every gun comes out perfect off a production line. Luckily mine has not had a single problem since I changed my ammo choice. And I have literally spent all day shooting brick after brick with no hick-ups.

Yeah the mag release is a little rough and can be improved but its not unbearable or what people make it out to be (in my opinion its actually not that bad). I have seen someone hollow it out and shape a handle from quick steel, it looked a little tacky to me but it did make it easier to release the magazine if you have big fingers.


"ZERO aftermarket goodies?" A tad over-exaggerated don't you think? Care to explain cause I have seen some pretty sick looking customizations done to the 64. Stocks, barrels, magazines, misc parts are all relatively cheap and can be customized. Yeah there aren't multi-calibers and extended mags (they exist[ed] but nobody wants to sell them now) and stuff like that if that's what you mean but there are things you can do to it.
 
"ZERO aftermarket goodies?" A tad over-exaggerated don't you think? Care to explain cause I have seen some pretty sick looking customizations done to the 64. Stocks, barrels, magazines, misc parts are all relatively cheap and can be customized. Yeah there aren't multi-calibers and extended mags (they exist[ed] but nobody wants to sell them now) and stuff like that if that's what you mean but there are things you can do to it.

I got rid of mine about a year ago, but right after I bought it (about three years ago) I looked for aftermarket parts. Nothing. No extra-cap magazines and no stocks specifically. Maybe things have changed in the last year or two.
 
The Savage 64 and Mossberg 702 just do not seem to get the aftermarket love that the Marlin 795 and Rem 597 do. Of course, the 10/22 is in a whole other category...

I do not see too many Stevens 200s at the LGS, but I have always been interested. They share quite a bit of parts with the Savage 10 series don't they? I wonder if they will keep the Stevens 200 in the lineup with the newer Axis competing against the Marlin x7 and Ruger American.

This is really a pretty good time to buy a basic, functional centerfire bolt - lots of choices for not much cash.

Sometimes I wonder if all the money being poured into AR and AK pattern semis has softened the market on bolts and lowered the price - if so, that may be the one thing I like best about AR and AK patterns. :scrutiny:
 
You want to aftermarket trigger from Rifle Basix for the savage 200. It is the SAV-3 trigger kit adjust from 1 to 3 lbs too. Easy to do at home with great dirrections on the web page for review. I beleave the price was the same direct or from EABCO- for 84 dollars. Check shipping cost- http://www.eabco.com/Savage-Triggers.html

The stock can improved or changed but doe seem to work fine as is. Boyd's stocks makes savages lam stock and they do have around 6 different models all at alow cost too. The steven 200 is nothing more than the old model 10/110 series with a regular trigger and plain matt blue finsh. Great shooters.
 
@DeadFlies:

Nothings really changed that much. As I have said they use to offer a 20 round magazine. But apparently they were prone to jamming (personally I think it was the owners fault; trying to fire their semi-auto like its a fully auto by pulling the trigger ridiculously fast). I managed to find one and I am waiting on the person to give me a price for it. Until then the 3 10 round mags I have keep me shooting for a while.

Stocks are only $30 and are easy to customize yourself as far as paint jobs go. If you want to change the shape, bondo is your friend. Otherwise all the stocks are the same. it's not impossible to completely customize the gun. It just requires some work.

@pseudonymity:

Yeah I agree. And yes the 200 essentially is the 110 (long action)/10 (short action) just with no accu-trigger and a synthetic stock instead of wood. Personally I could care less about all that stuff though. Just give me a gun I can take to the field and not have to care about it getting dinged up or something else.


@hardluk1:

Thank you for the link. I was just on that site looking at what barrels they offered (can get them cheaper though).

Only complaint I have heard about it is that the recoil is hard because the stock is so light. But it is a cheap fix (don't even have to buy a new stock).
 
Status
Not open for further replies.
Back
Top