peeplwtchr
Member
- Joined
- Sep 20, 2019
- Messages
- 1,608
Hi All-
I now have basic loading down (Per manuals) for 9mm and .223, and am looking to start tweaking seating depth on my best .223 nodes.
I determined that my distance to the lands is COAL 2.349 OGIVE 1.930, using the method below, where I use a dremel to cut a case neck: .
I have read that I should start .015 thosandths off the lands, then seat .003 deeper with each ladder step?
I am seeing many methods, but couldn't find anything here, which I trust most. What is your process?
Thanks
I now have basic loading down (Per manuals) for 9mm and .223, and am looking to start tweaking seating depth on my best .223 nodes.
I determined that my distance to the lands is COAL 2.349 OGIVE 1.930, using the method below, where I use a dremel to cut a case neck: .
I have read that I should start .015 thosandths off the lands, then seat .003 deeper with each ladder step?
I am seeing many methods, but couldn't find anything here, which I trust most. What is your process?
Thanks