AJC1
Member
Ran my test loads for the silhouette data I received from ramshot via phone. I guess I should have asked but I'll assume it was for jacketed bullets. The ladder ran from 8.4 grains to 9.2 grains in .2 grain increments. The starting load of 8.4 grains felt really good and was the most accurate in my opinion. I did have a flyer but you judge for yourself. I test all pistols at 10 yards as I always have.
8.4 load. I'm sharing a target with my son so extra holes disregard. The load slowly opened up as charge weight went up. The max load I was given was 9.2 grains and the cases just barely started getting sticky extractions so 9.0 is my new limit for this load. The bullet was if your curious was the 154swc noe mold. Seating depth was 1.585. Primer fed 200 spm. max load.
8.4 load. I'm sharing a target with my son so extra holes disregard. The load slowly opened up as charge weight went up. The max load I was given was 9.2 grains and the cases just barely started getting sticky extractions so 9.0 is my new limit for this load. The bullet was if your curious was the 154swc noe mold. Seating depth was 1.585. Primer fed 200 spm. max load.