Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

38 special load needed 358477 mold

Discussion in 'Handloading and Reloading' started by LUCKYDAWG13, Nov 7, 2013.

Thread Status:
Not open for further replies.
  1. LUCKYDAWG13

    LUCKYDAWG13 Member

    Joined:
    Jun 6, 2011
    Messages:
    807
    Location:
    Illinois
    hi all looking for a 38 special load using bullseye / RedDot / 231
    for powder and 150gr bullets from Lyman mold 358477 i have a
    load that i like with 357 brass but i just got a bunch of 38 brass
    to use up so if you have a pet load i can use one this will be shot
    out of a 3" SP101 just for punching paper and banging steel
    thanks
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    Bullseye 2.8 Start - 4.0 MAX.
    W-231 3.5 Start - 4.7 MAX.

    Red Dot ??
    I use 3.5 with a 158, and it should work as well with a 150.

    rc
     
  3. LUCKYDAWG13

    LUCKYDAWG13 Member

    Joined:
    Jun 6, 2011
    Messages:
    807
    Location:
    Illinois
    thanks RC
     
  4. Jesse Heywood

    Jesse Heywood Member

    Joined:
    Dec 9, 2009
    Messages:
    2,252
    Location:
    Kansas
    I had a batch of 152 gr wadcutters. No chrony. Best loads.
    Bullseye - 2.6 gr
    Red Dot - 2.5 gr

    If you have any IMR 7625, 2.7 gr was my best overall.
     
Thread Status:
Not open for further replies.

Share This Page