Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

40 S&W Bullseye loads?

Discussion in 'Handloading and Reloading' started by Pw, Nov 5, 2011.

Thread Status:
Not open for further replies.
  1. Pw

    Pw Member

    Joined:
    Nov 5, 2011
    Messages:
    9
    Anyone have good feedback using Bullseye in 40 S&W loads?
     
  2. bds

    bds Member

    Joined:
    Jan 10, 2010
    Messages:
    13,007
    Location:
    Northwest Coast
    Welcome to THR. :D

    For full power loads, most will suggest Unique or slower burning powders for 40S&W and I would agree.

    Although current load data for 40S&W loads are available for Bullseye, you'll find the loads quite stout and very snappy in recoil to be comfortable.

    For lighter target/plinking or match shooting loads, faster burning powders like Bullseye, Promo/Red Dot, Green Dot, Titegroup, Clays, W231/HP-38, etc. will produce mild to moderate recoil yet accurate loads depending on bullet weight/powder/charge.

    For me, I need to push the lighter 155/165 gr bullets at high-to-near max load data to produce more accurate loads but this will generate more snappy loads. If you want less snappy recoil, heavier 180 gr bullet with start-to-mid range load data with moderately fast burning powders like W231/HP-38 will produce very manageable recoil and very accurate loads. If you haven't tried W231/HP-38 and 40S&W, I highly recommend it.
     
  3. Mcinterest

    Mcinterest Member

    Joined:
    Jan 4, 2011
    Messages:
    13
    Location:
    Omaha, NE
    I use Bullseye 5.0 gn with Berrys 165 FP
     
  4. beatledog7

    beatledog7 Member

    Joined:
    Jun 18, 2011
    Messages:
    5,093
    Location:
    Tidewater
    Also 5.0gr Bullseye with 165gr plated bullets, and seated as long as my mags will take (Glock).
     
  5. cberge8

    cberge8 Member

    Joined:
    Jun 12, 2011
    Messages:
    158
    Location:
    Houma, la
    I have had great success using Bullseye for my plinking rounds in a SIG P226.

    180gn Bayou Bullets TC - 4.3gn Bullseye at an OAL of 1.130 gives me about 980fps, low recoil, and very accurate.

    170gn Missouri Bullet Company SWC, same load as above getting 960fps with very low recoil and amazing accuracy.
     
  6. bds

    bds Member

    Joined:
    Jan 10, 2010
    Messages:
    13,007
    Location:
    Northwest Coast

    Attached Files:

    • 40BE.jpg
      40BE.jpg
      File size:
      50.7 KB
      Views:
      150
  7. Pw

    Pw Member

    Joined:
    Nov 5, 2011
    Messages:
    9
    Thanks for some good intel. I've tried allot of different powder in my 9mm and Bullseye gives some incredible accuracy. I'm hoping to get the same results in my 40
     
  8. bds

    bds Member

    Joined:
    Jan 10, 2010
    Messages:
    13,007
    Location:
    Northwest Coast
    Bullseye and Titegroup will produce slightly more accurate loads than W231/HP-38, but I prefer the milder recoil and broader load range that are very usable.

    I don't mind the high-near max load data 9mm Bullseye loads that produce snappy firm recoil but prefer mid-high range load data 40S&W W231/HP-38 loads with less snappy recoil and less pressure issues as they don't hardly bulge the cases.
     
  9. Kidslash

    Kidslash Member

    Joined:
    Nov 6, 2011
    Messages:
    31
    Location:
    NEW JERSEY
    I prefer 5.0g VV N320 with a 180g bullet head. Clean and accurate.
     
  10. ImjinScout

    ImjinScout Member

    Joined:
    Sep 26, 2011
    Messages:
    111
    Location:
    Michigan
    Don't rule out HS-6 for .40S&W, IMO great powder and is real accurate. I currently load 6.7grs of HS-6 with berry's 180gr FP bullet. Nice target load and does not have that snappy recoil that the .40 S&W is known for.
     
  11. rsrocket1

    rsrocket1 Member

    Joined:
    May 20, 2010
    Messages:
    1,242
    Location:
    Sacramento, CA
    Just tested a batch of 180g Bear Creek Moly coated RNFP over Bullseye in a 4.25" M&P40.
    "Full house" load was 5.0g Bullseye 1.135" COL (.280" seat depth). Predicted pressures were 26,250 psi (25% below SAAMI max), predicted velocity was 1002 fps.

    Actual velocity averaged 992 fps ES 9 fps, SD 4.3 fps. Moderate recoil, and lighter recoil than 6.0g Power Pistol which generated only 962 fps. Also shot some with 3.8g Bullseye and those averaged 850 fps with an even more gentle "springy" flip.

    While Bullseye is a denser powder than Unique or Red Dot which will spill over with a double charge, a double charge (10 grains) of Bullseye will definitely be noticeable unless you use an automatic bullet feeder so I don't find it risky to use.
     
Thread Status:
Not open for further replies.

Share This Page