ballman6711
Member
This is part 2 of my 45acp primer test. Part 1 is linked below.
The tested load remains the same, as listed below:
5.4gr W-231
Acme 185gr SWC
Various spp and lpp
Mixed brass
1.245" OAL
Crimp .468~.4685"
Today's testing session started at 34* F according to my truck, but had warmed to the low 50's by the time I left three hours later.
I'll post a pic of my note page along with my final thoughts in the next post.
chris
45acp Primer Test Part 1
I promised to do a primer test a few weeks ago, so here it is (part 1). All rounds were loaded with my usual load which is as follows: 5.4gr W-231 (all charges weighed on RCBS 505, scale leveled before adding powder) Acme 185gr swc Winchester LPP Mixed brass 1.245" OAL .968~.9685" Crimp I...
www.thehighroad.org
The tested load remains the same, as listed below:
5.4gr W-231
Acme 185gr SWC
Various spp and lpp
Mixed brass
1.245" OAL
Crimp .468~.4685"
Today's testing session started at 34* F according to my truck, but had warmed to the low 50's by the time I left three hours later.
I'll post a pic of my note page along with my final thoughts in the next post.
chris