I built 6 ARC Ar15 with Odin Works barrel and have been reloading some for it. As others have mentioned, components very hard to find. I loaded 100 65gr vmax bullets with PowerPro Varmint for starters and then I found 1 box of Berger 100gr target bullets and 1 box of 100gr Hornady soft tips. I've shot 1 inch 5 shot groups at 100 yds but not real consistently. I think overall for the ar platform that it's pretty accurate. Best load so far was with some IMR 4166. I did not have load data for this one so was a bit nervous. Loaded 2 each from 25-28grs in increments of 0.5 - I had no pressure signs until 27.5 which showed very slight ejector marks so I decided to try the 28's which blew primers and deformed the brass so definitely over pressure for me at 28. The 27's actually shot great so I've loaded a handful of those for more testing. I don't have Quickload but if any of you do and could check numbers then that would be great also.
Last edited: