Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

After Market Stocks for Savage Model 16 FCSS

Discussion in 'Rifle Country' started by Chizzy, Feb 21, 2010.

  1. Chizzy

    Chizzy New Member

    Joined:
    Jan 17, 2008
    Messages:
    11
    Hello:

    I was wondering if there are any after market stocks available for the Savage Model 16 FCSS. Ideally, I am looking for something that is synthetic in camo. The gun in question is a .223 Remington with a bottom detachable magazine. My gun has 3 action and trigger guard attachment screws on the bottom. The distance between the front action screw and the front trigger guard action screw measures 4.389" from center to center (instead of the 4.25" measurement found on the older models).

    Thank you in advance for any advice you can provide me.

    Regards,

    Chizzy
     
  2. jpwilly

    jpwilly Senior Member

    Joined:
    Aug 10, 2007
    Messages:
    3,892
    Location:
    Phoenix AZ
    Choate perhaps...see below:

    Will my Savage rifle fit in to one of your stocks?
    All but the early short actions rifles will fit in one of our stocks. If your rifle has a center to center hole spread of 4.275 for the short action or 5.062 for the long action or the controled feed short action which is 4.407 our stock will work. Some of the Savage 110 long action rifles come in short action calibers like 223 or 308 so you can't assume you have a short action based on the caliber. If you have a model 110,111, 1112, 114 or 116 your rifle is a long action if you have a model 10, 11, 12, or 16 your rifle is a short action. Our stocks will not fit rifles with detachable magazines with the button on the side. We do make a stock for the short action detachable magazine rifles that have the mag lever in front of the mag well.
     

Share This Page