I have some Xtreme 124 gr. HPs and have been told to load them with info from a Speer manual. I don't have one of those yet, only a Lyman #49.
Have feed issues and think it may be not enough powder. When using 3.6 grains of Titegroup all three of my Glocks function normallly. When using 3.3 grains, the G17 works fine, but he G19 and G26 have problems with the bullet sticking at the feed ramp. My OAL is 1.110. Don't know if I should seat a little shorter to 1.095 or if that would make a difference. I'm thinking maybe to up the load to about 3.4 or 3.5 grains. Trying to keep it soft as possible.
Looking at pictures of my grouping, on second thought, the 3.6 load accuracy is better anyway.
Have feed issues and think it may be not enough powder. When using 3.6 grains of Titegroup all three of my Glocks function normallly. When using 3.3 grains, the G17 works fine, but he G19 and G26 have problems with the bullet sticking at the feed ramp. My OAL is 1.110. Don't know if I should seat a little shorter to 1.095 or if that would make a difference. I'm thinking maybe to up the load to about 3.4 or 3.5 grains. Trying to keep it soft as possible.
Looking at pictures of my grouping, on second thought, the 3.6 load accuracy is better anyway.