powwowell
Member
Berry 124 gr HPs, G19/Lone Wolf Barrel Questions?
I have a favorite load of 4.0 grains of Titegroup, 124 grain Berry Plated HPs, CCI primer, seated at a 1.095 overall length. Works great with the Glock factory barrel.
I bought a Lone Wolf barrel, just in case I wanted to shoot lead through my G19. When trying the above Berry 124 load, the slide won't close. If I seat the bullets to an overall length of 1.016, the slide closes normally. Before I touch off a few rounds, I thought it would be prudent to ask a question, or two: 1) should I reduce the powder charge? 2) is the G19 expected to feed properly with cartridges this short (1.016)? Thanks.
I have a favorite load of 4.0 grains of Titegroup, 124 grain Berry Plated HPs, CCI primer, seated at a 1.095 overall length. Works great with the Glock factory barrel.
I bought a Lone Wolf barrel, just in case I wanted to shoot lead through my G19. When trying the above Berry 124 load, the slide won't close. If I seat the bullets to an overall length of 1.016, the slide closes normally. Before I touch off a few rounds, I thought it would be prudent to ask a question, or two: 1) should I reduce the powder charge? 2) is the G19 expected to feed properly with cartridges this short (1.016)? Thanks.
Last edited: