Anyone use a Lee Auto Disk?

[noylj]

PS: no petroleum products to contact powder measure. No oil or grease. Graphite dry lube only. Try a Reloading site like midway.

 

[Captain Quack]

More information is always a good thing. Just have to find out which powders I have are like that. To be sure I'm not misunderstanding it is safe to spray the disks and the platform and the rod that goes up and down with the graphite spray?

Captain Quack.

 

[Captain Quack]

The can says dry lube so I guess that would work.
https://www.homedepot.com/p/Blaster-5-5-oz-Industrial-Graphite-Dry-Lubricant-8-GS/202597501

Captain Quack.

 

[noylj]

The rod needs no graphite, but you can apply if you want

 

[noylj]

The Blaster product is just graphite, I assume, and solvent/propellant. Their MSDS mentions all the liquids, but doesn't reference graphite...

 

[rdnktrkr]

When I do anything with mine I always wipe it down with used dryer sheets for static and lock graphite, the springs alone have always worked for me. Have you checked the screws for being to tight?

 

[Captain Quack]

Tilos spring hack seemed to fix the problem very well. it's now throwing consistently. I'm even tempted to try the charge bar again.

Captain Quack.