barnbwt
member
- Joined
- Aug 14, 2011
- Messages
- 7,340
Hey, guys,
I'm gonna try to get my .510" barrel blank contoured for my 50 Alaskan build, and I need a barrel thickness to shoot for. Right now, it's a 1.75" rough turn, which is way too thick. It's going onto a Steyr M95 receiver, so that will define the thickness at the threads, but I don't know what diameter would be needed to keep the 18"-20" barrel sufficiently stiff over its length. I don't need accuracy so much as light weight, but I also don't want the barrel easily whipped around or bent
eek by recoil.
The reciever is sufficiently strong for 8x56R, so it's plenty capable of handling the much lower pressure and equal bolt-thrust of 50 Alaskan--no worries there.
Unless someone here owns a 50 Alaskan or similar (50-90+), I am going to base my profile on the Ruger No. 1 barrel--known for its strength (and ability to be rechambered to 50 Alaskan). I would use the Winchester M71 thickness, but I don't know if the barrel is replaced with a thicker one during the conversion.
Thanks guys, hopefully I can get this knocked out this weekend!
No, I won't be keeping the steel-plated military stock, so I don't need to fit the barrel inside handguards, or anything
TCB
I'm gonna try to get my .510" barrel blank contoured for my 50 Alaskan build, and I need a barrel thickness to shoot for. Right now, it's a 1.75" rough turn, which is way too thick. It's going onto a Steyr M95 receiver, so that will define the thickness at the threads, but I don't know what diameter would be needed to keep the 18"-20" barrel sufficiently stiff over its length. I don't need accuracy so much as light weight, but I also don't want the barrel easily whipped around or bent
eek by recoil.The reciever is sufficiently strong for 8x56R, so it's plenty capable of handling the much lower pressure and equal bolt-thrust of 50 Alaskan--no worries there.
Unless someone here owns a 50 Alaskan or similar (50-90+), I am going to base my profile on the Ruger No. 1 barrel--known for its strength (and ability to be rechambered to 50 Alaskan
). I would use the Winchester M71 thickness, but I don't know if the barrel is replaced with a thicker one during the conversion.Thanks guys, hopefully I can get this knocked out this weekend!
No, I won't be keeping the steel-plated military stock
, so I don't need to fit the barrel inside handguards, or anything TCB
