JCSC
Member
Finished my A2 build tonight and had a function check issue.
BCG will not slam closed on a round. It only goes about .100 from engaging, but will extract the round.
it is the BCG because I swapped a used one and it closed fine.
Both are PSA so decent quality.
also pulled them both apart on the bench and they look the same, as far as extractor profile and such.
Any ideas?
BCG will not slam closed on a round. It only goes about .100 from engaging, but will extract the round.
it is the BCG because I swapped a used one and it closed fine.
Both are PSA so decent quality.
also pulled them both apart on the bench and they look the same, as far as extractor profile and such.
Any ideas?