Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

beretta shotgun problems

Discussion in 'Gunsmithing and Repairs' started by saltysenior, Jul 31, 2006.

Thread Status:
Not open for further replies.
  1. saltysenior

    saltysenior Member

    Joined:
    Jun 1, 2006
    Messages:
    2
    Location:
    s.fl.
    my a 302 12 ga. has started to misfire... 1 out 3 shots...the primer is only slightly indented...the other rounds show a good indent....all high brass.:cuss:
     
  2. hoghunting

    hoghunting Member

    Joined:
    Feb 16, 2006
    Messages:
    1,597
    Have you pulled the firing pin from the bolt and cleaned it and the bolt? Your gun is over 20 yrs old and if the bolt has never been taken out and cleaned, that could be the cause of your problems.
     
  3. das028

    das028 Member

    Joined:
    Jun 15, 2006
    Messages:
    245
    Location:
    Frederick, Maryland
    What hoghunter said, and check your actual firing pin for damage as well.
     
Thread Status:
Not open for further replies.

Share This Page