Best Tackdriving .22?

Status
Not open for further replies.
I've been thinking about which model to get, the 452 or 453. I've read the 453 varmint comes with a floated barrel, but the 452 has a barrel lug so it isn't floated.

So maybe someone can answer this: How important is it to the accuracy on the CZ to have the floated barrel? Is it possible to float the barrel on the 452?

I know the 453 is more expensive but I don't mind the buy the 452 and buy the Brooks kit. I'd rather have a nice trigger set to about 10 to 12 ounces. I've read that trying to get the 453 trigger that light will make the bolt come out while cocking.
 
I know the 453 is more expensive but I don't mind the buy the 452 and buy the Brooks kit. I'd rather have a nice trigger set to about 10 to 12 ounces.
Click to expand...

I haven't read all the replies in this thread, so I don't know if this has been covered yet, but I'll offer a word of caution about the Brooks kit:

I found the Brooks kit to be a terrific little kit, but IMO it has it's limits and shouldn't be used to attempt to turn the factory trigger into some kind of competition bench trigger. If you go crazy with it to get as light and creep-free trigger as possible, you may very well end up with an unsafe trigger.

The kit utilizes shims and springs that are installed in different combinations to get the trigger quality you're looking for. The problem is that if you go overboard, you can, without knowing it, take too much creep out, such that the sear is engaged by mere microns. Especially when combined with a light trigger, there's very little holding the sear. Even if it passes an initial bump safety test, it may finally let go when you least expect it.

No matter to what pull weight you adjust the trigger, safety bump test before you proceed, and repeat the test at regular intervals. You'll probably find more info on this at rimfirecentral.com.

My recommendation is to be conservative with the Brooks kit; but if you do make your 452 trigger this light with it, consider it a bench-only rifle and chamber a round only after you've got your target in your sights.
 
Last edited:
I guess you could go out and spend all kinds of cash on all kinds of rifles, but for $200 you can buy a winchester wildcat (bolt action) that has a shaved down target barrell.

I put a bushnell scope on mine and can knock the eye out of a squirell at 50yds.

Aguilla supermaximum hypervelocity (1750fps) 22lr ammo

I could have paid much more money for something else, but I can't remember needing to fire off another shot immeadiatly because I don't miss with it.

Also it is a nice looking little gun.
 
CZ replacement stock, and trigger

Olympus,

If you decide to buy CZ, try to shoot it first before you upgrade anything. My 452 training has been great. I lighten the trigger-pull by only adjusting it and it is good enough for me. I like mine at about 4 lb.

If you decided later that you need a better trigger, you can get Timney trigger for 452.

There are also a couple of folks who make replacement stocks for CZ. If you take a look at rimfirecentral.com, you can find sources for the replacement stock.

Good Luck,

-Pat
 
I bought a marlin 7000 (bull barrel) 5 years ago, and it still shoots almost through one hole consistently at 50 yards with jsut mini-mags. With a 6.5-20x50mm scope. I shot it at 100 yards recently but the ammo accuracy just wasnt there. I need to try again with some sub-sonics.
 
Olympus,

If you decide to buy CZ, try to shoot it first before you upgrade anything. My 452 training has been great. I lighten the trigger-pull by only adjusting it and it is good enough for me. I like mine at about 4 lb.

If you decided later that you need a better trigger, you can get Timney trigger for 452.

There are also a couple of folks who make replacement stocks for CZ. If you take a look at rimfirecentral.com, you can find sources for the replacement stock.

Good Luck,

-Pat
Click to expand...

I wish that was an option. I don't know anyone that has a 452 or 453 that I could shoot. I wish I could shoot one though.

I like my triggers to be a lot lighter than 4 pounds too. I have a Timney on my custom .308 and it's set at 22 oz. I'd like to have the CZ set to a little lighter than that.

And I've been on rimfire and I can't seem to find any aftermarket stocks. I'd really like to find a maple stock too.
 
My old mans anschutz has taken a gold medal. That was before it came into my family and my uncle, the man that bought it, knew the man who took the medal with it.

My grandfathers winchester 52 really is sub moa in the right hands at 100y.

My fathers mossberg 144 is similar to the winchester.

My mossberg 44 is a little more open and only does about 1.5 moa.

All groups are at 100y. All rifles have redfield sights. The anschutz has internationals on it, the others have olympics on them.
 
Not to sure about groups, but I've got about a "3rd or 2nd generation" Remington 34, and she's a real price of art, just wish I could get a picture up, because it's deadly accurate, espesially considering it was made between 1932-1935, serial no. 29871, so probaly made in 1933 I suppose.
Look at Remingtons firearms library. It's a beauty, aulthough the picture last time I checked, discredits the rifle.

Oh yea, I'm really wanting one of these rifles posted here for a .22 that I don't have to sweat over it if it bumps agains a pillow, my '34 is my baby:)
 
ok so... i havent read this entire thread but, look around and find yourself a nice used remington tagetmaster single shot with a heck of a long barrel:D. i have no idea how long the barrel is on mine but id guess 28". that gun is the most accurate gun i own
 
Not to sure about groups, but I've got about a "3rd or 2nd generation" Remington 34, and she's a real price of art, just wish I could get a picture up, because it's deadly accurate, espesially considering it was made between 1932-1935, serial no. 29871, so probaly made in 1933 I suppose.
Look at Remingtons firearms library. It's a beauty, aulthough the picture last time I checked, discredits the rifle.

Oh yea, I'm really wanting one of these rifles posted here for a .22 that I don't have to sweat over it if it bumps agains a pillow, my '34 is my baby
Click to expand...

Here ya go. Remington model 34 is the top rifle and a BRNO #1 Sporter is the lower one.

DSC0190800000.jpg
[/IMG]
 
I'm pretty much in the same boat right now as everyone else who is debating between a CZ 452 Varmint or Savage MKII BV (I'm into the heavy barrels, but an American and Non-V Savage would be the same comparison).

I've read the good and bad of both, and it really seems like it comes down to cost. I haven't been able to handle either yet, but it seems like the CZ's action is better. Many people on have commented on the Savage's cheap feel in the action.

From what I can tell, it all comes down to where you buy from to get the best deal. Id like to save as much money as I can, and I'd ultimately like to pick up a CZ. However, if I can't find one for the right price, I'll end up getting a Savage.

My plan is to get a harris bipod and a Mueller APV 4.5-14 (or possibly a Bushnell Banner 4-16.. haven't decided yet), and do some competition shooting. That is why the CZ is ultimately a more tasteful option.

If anyone else has any more input that might truly sway me 100% over to the CZ side of life AND/OR drop some hints as where would be the right place to buy a CZ at a good price, it would be most appreciated by me and anyone else in the similar boat.
 
Ah thank you. I'll have to call them and see what kind of price they can hook me up with.
 
My plan is to get a harris bipod and a Mueller APV 4.5-14 (or possibly a Bushnell Banner 4-16.. haven't decided yet), and do some competition shooting. That is why the CZ is ultimately a more tasteful option.
Click to expand...

For competition , you would probably be better suited with CZ , I am enjoying the heck out of my GVXP , shown with Tasco , but was replaced with a Mueller APV , which really allows me make accurate hits with.

MarkII%20GVXP.jpg
 
Did not read all the posts but agree with most of the rifles suggestions. Just as important though, is the ammunition. 22 rimfires can be picky but a little patience in finding the right ammo will reap satisfying rewards for you.
 
Status
Not open for further replies.

Similar threads

C
  • Locked
Match M1A, AR-10, or DMPS LR-308 for tackdriving?
2
Replies
29
Views
4K
CanonNinja
C
X
  • Locked
.22 plinking rifle suggestions?
Replies
9
Views
543
SaMx
S
G
  • Locked
An afternoon at the range with my 8 year old.
Replies
9
Views
938
GregC
G
P
  • Locked
a couple of old confusing remingtons
Replies
7
Views
668
788Ham
7
C
  • Locked
mossberg 22
Replies
1
Views
286
Bill B.
B
Back
Top