So the local FleetFarm store had an Axis package for $239 with a cheap scope. At that price it was too cheap NOT to buy. I've always wanted a .223 bolt for a range toy. I knew this DIDN'T have the accu-trigger so I ordered a spring kit that was suppose to be 3.5-4#, factory trigger breaks with a GRITTY consistent 6#'s. Decided to do an initial cleaning and pull the action to see what the basic trigger group looked like. Interesting...looked like a cast (?) trigger with a stamped sheet metal sear / bolt release, all containing VISIBLE burrs and roughness. Pulled the pins and cleaned the burrs off and polished with stone and 1000 grit emery. Reassembled, threw a snap cap in, cocked and attached the trigger scale, 2.2#, ?? that can't be right. Tried several times and it repeats right at 2.2#. Held it up to my shoulder and I believe it is 2.2# with a little pre travel (that I'm OK with). Cocked and bounced butt on floor, no NDC. Opened a slammed bolt closed repeatably, no NDC.