Bt-99 ??
- Thread starter MARKMALL
- Start date
- Status
birdshot8's
Member
does it eject everytime you open it or is it only sometimes? if only sometimes maybe you are bumping it, enough to engage the ejector.
rcmodel
Member in memoriam
Hard to diagnose from where I am setting.
But only the early BT-99 had an ejector function, and all newer ones only have the extractor function.
So, we will assume yours is an old model.
Here is a parts schematic.
http://media.browning.com/pdf/om/bt99plusmanual.pdf
I would start by inspecting parts 6 through 16 for breakage, wear, gummed up dirt & oil, or lack of lubrication at all.
Pay particular attention to #7 Ejector extension, #8 Ejector hammer, #11 Sear, and #16 Trip Rod.
rc
But only the early BT-99 had an ejector function, and all newer ones only have the extractor function.
So, we will assume yours is an old model.
Here is a parts schematic.
http://media.browning.com/pdf/om/bt99plusmanual.pdf
I would start by inspecting parts 6 through 16 for breakage, wear, gummed up dirt & oil, or lack of lubrication at all.
Pay particular attention to #7 Ejector extension, #8 Ejector hammer, #11 Sear, and #16 Trip Rod.
rc
birdshot8, it is doing it most of the time but not all the time. I do not think I am bumping it. Thank you for your repley.
rcmodel, it is an older model BT. I am going totake out the ejector hammer & sear and look at them. Thank you for your repley.
rcmodel, it is an older model BT. I am going totake out the ejector hammer & sear and look at them. Thank you for your repley.
- Status
