Budget pocket gun for saltwater

Status
Not open for further replies.
Regardless of what you end up choosing it would be helpful to remember that stainless does not mean rustless. Any intrusion by salt water or sea air will set up conditions for rusting. Even if your ZipLock seems intact all it takes is a little bit of salt to mess up the gun's finish.

When you come home and clean your gun after a day's outing I would suggest that you use the hot water method, similar to the way the black powder guys clean their guns. A full disassembly, cylinder included, followed with good flush with very hot water will clear out any salt or salt water, and will heat the metal up to the point where left over water (in the nooks and crannies) will evaporate off. Lubricate and oil after the gun has dried.

For a revolver you may want to hit the firing pin channel with a shot of WD40 to clear out any remaining water, then brake cleaner to clear out the WD40.
 
If you go the black powder cleaning route, then I'd ad an air compressor to that is well. Hot soapy water, air compressor blow out, WD-40, air compressor air compressor blow out, then lube as normal.

That's just me. :D
 
It seems we've had a discussion on guns while kayaking in the past, but I can't quite find it now. Here are a couple of threads on guns when boating/fishing though.

Boating http://www.thehighroad.org/showthread.php?t=672352&highlight=kayak

Fishing http://www.thehighroad.org/showthread.php?t=734984&highlight=kayak

We do have a forum member kayak-man, that may be worth contacting about his gun choices. I believe he posted in both of the above threads.

I'd make sure it was either attached to a lanyard or in a floating container just to make sure it didn't end up at the bottom of the sea.
 
How about one of the earlier Glocks, where they still used the nitride/Tenifer treatment on the slides? Tenifer makes for a very abrasion and corrosion-resistent surface, and obviously the polymer frame is completely impervious to water and corrosion.
Also, unlike a revolver, Glocks are extremely easy to completely disassemble and reassemble, meaning they can frequently be internally inspected,cleaned and re-lubed.
An old beater Glock can be found pretty cheap on the used sites like Armslist,
and places like AIM often have police trade-ins pretty inexpensively.
 
Originally Posted by Shootshellz View Post
<<S&W SD9VE in 9mm Luger caliber. Stainless barrel and slide, polymer frame, budget price. What's not to like?>>

That sounds like a good choice. I always forget about that one. Maybe it's a cargo pocket sized gun?
I can fit mine in my pocket with Dockers or cargo pants.

Not good for EDC though. It's pretty heavy for pocket carry and I can't find a Desantis Nemesis big enough for it.
 
Status
Not open for further replies.
Back
Top