firesafety3
Member
So I am towards the end of my second shooting session with the Bushy. Everything is going nicely until I go to put the rifle on "SAFE" to check impact on the target. The lever won't move, just stuck in the 12 o'clock position.
I should have one round left in the mag so I reshoulder and...nothing. Trigger won't pull, safety lever won't move.
I eject the mag, clear the round, bring the bolt forward a few times, and began to look for anything amiss. With nothing found, I reinsert a full mag and load the chamber. Two rounds go down range fine then another "lockup".
I separated the upper to see if something may be interfering inside (foreign object) but found nothing. By this time it's dark and time to head home...with a malfunctioning weapon. Absolutely nothing worse.
The rifle has maybe 200 rounds through her and never a problem.
Appreciate any comments!
I should have one round left in the mag so I reshoulder and...nothing. Trigger won't pull, safety lever won't move.
I eject the mag, clear the round, bring the bolt forward a few times, and began to look for anything amiss. With nothing found, I reinsert a full mag and load the chamber. Two rounds go down range fine then another "lockup".
I separated the upper to see if something may be interfering inside (foreign object) but found nothing. By this time it's dark and time to head home...with a malfunctioning weapon. Absolutely nothing worse.
The rifle has maybe 200 rounds through her and never a problem.
Appreciate any comments!