Took my S&W M41 .22 LR pistol to the range today with two magazines. One magazine loaded fine. The other would only take two rounds when the follower stopped. OK, it hadn't been used in over a year so I oiled it well and worked the follower button all the way down. Tried to load ammo again and it stopped after two rounds. Can you guess what the problem was? See the postscript below for answer.
Good shooting and be safe.
LB
ps: Did you guess the cause? If so, go to the head of the class. In my 66+ years this is the first time I have ever seen it happen.
Ans: A small Allen wrench had worked it's way into the long slit in M41 mag and was hidden inside the magazine, blocking the follower from moving lower when held in position for loading rounds. I removed the Allen wrench and voila', no more problem. Apparently I was holding the mag in a different position when moving the follower button all the way down after oiling it.
Good shooting and be safe.
LB
ps: Did you guess the cause? If so, go to the head of the class. In my 66+ years this is the first time I have ever seen it happen.
Ans: A small Allen wrench had worked it's way into the long slit in M41 mag and was hidden inside the magazine, blocking the follower from moving lower when held in position for loading rounds. I removed the Allen wrench and voila', no more problem. Apparently I was holding the mag in a different position when moving the follower button all the way down after oiling it.