G36-UK
Member
I've recently played Metal Gear Solid 3 (again), and I was interested to notice that his 1911 was customized in various ways. I quite liked the idea of a custom 1911, and I'd like to know if any of it's possible.
Below, I've listed the modifications to his 1911, with alleged benefits in brackets. I'd appreciate it if you could tell me what the real benefits of each modification, if it's just as described, different, or not benefit at all.
1) Feeding ramp polished to a mirror sheen (Apparently, it reduces feeding problems.)
2) Slide reinforced, meshes perfectly with frame (Not sure here.)
3) Frame Iron welded and scaraped down multiple times (Apparently for "maximum precision. See 2.)
4) Front Strap part of frame checkered to dig into hand (Prevents slipping)
5) 3-dot sight system with enlarged front sight (gives superior target sighting capability)
6) Regular hammer replaced with ring hammer (enhances cocking control and increases down-speed)
7) Removal of grip safety (Can't see what good this would do)
8) Extended slide stop and thumb safety (for more precise handling)
9) Base of trigger guard whittled down a bit (for higher grip)
10) Long type trigger (not sure here)
11) Trigger pull of 3.5 pounds (same)
12) Wider magazine well (easier to insert new magazine)
13) Slightly cut down mag catch button (Reduce chances of accidental use of button)
14) Mainspring housing changed to flat type (to increase grip)
15) Housing fitted with stepping (to avoid slipping from recoil (?))
16) Cocking serrations on front of slide (easier to cock?)
Okay, so the wordings are almost all taken from the game (conversation with SIGINT), so I don't know if it's all do-able or a load of crap.
Thanks in advance.
Below, I've listed the modifications to his 1911, with alleged benefits in brackets. I'd appreciate it if you could tell me what the real benefits of each modification, if it's just as described, different, or not benefit at all.
1) Feeding ramp polished to a mirror sheen (Apparently, it reduces feeding problems.)
2) Slide reinforced, meshes perfectly with frame (Not sure here.)
3) Frame Iron welded and scaraped down multiple times (Apparently for "maximum precision. See 2.)
4) Front Strap part of frame checkered to dig into hand (Prevents slipping)
5) 3-dot sight system with enlarged front sight (gives superior target sighting capability)
6) Regular hammer replaced with ring hammer (enhances cocking control and increases down-speed)
7) Removal of grip safety (Can't see what good this would do)
8) Extended slide stop and thumb safety (for more precise handling)
9) Base of trigger guard whittled down a bit (for higher grip)
10) Long type trigger (not sure here)
11) Trigger pull of 3.5 pounds (same)
12) Wider magazine well (easier to insert new magazine)
13) Slightly cut down mag catch button (Reduce chances of accidental use of button)
14) Mainspring housing changed to flat type (to increase grip)
15) Housing fitted with stepping (to avoid slipping from recoil (?))
16) Cocking serrations on front of slide (easier to cock?)
Okay, so the wordings are almost all taken from the game (conversation with SIGINT), so I don't know if it's all do-able or a load of crap.
Thanks in advance.