d'zaster,
It simply stopped extracting the fired case. I figured it might be the extractor, but we solved that with a gun swap and I was back to shooting an H&K.
We had some other problems with the H&K, our officers posted in the marine unit found that their guns rusted badly. They were on the sea water or docks all the time, so it did not surprise me.
I also noticed that the pins in the receiver sometimes backed out of their position.and would block the slide when I re-assembled the gun.
I think I had about 5,000 to 6,000 round through it.
JIm
It simply stopped extracting the fired case. I figured it might be the extractor, but we solved that with a gun swap and I was back to shooting an H&K.
We had some other problems with the H&K, our officers posted in the marine unit found that their guns rusted badly. They were on the sea water or docks all the time, so it did not surprise me.
I also noticed that the pins in the receiver sometimes backed out of their position.and would block the slide when I re-assembled the gun.
I think I had about 5,000 to 6,000 round through it.
JIm
Last edited: