Ever wore out a GLOCK ?

Status
Not open for further replies.
G

Greg8098

Member
Joined
Sep 28, 2006
Messages
300
Location
Bossier City, Louisiana
I have heard that the life span of the .40/ .357, and 10mm Glocks is somewhere around 35,000 to 40,000 rounds. Anybody ever wore out one of these models out before? If not then what is your current round count.
 
I'll get back to you after 36,000 rounds. So far I've shot 4K out of my G35 (born in November '06) and haven't had any problems. I've shot hundreds in one session, I've shot under the scorching sun and pretty much beat it to death.

BUT the one thing I do: Is keeping it clean.

I really don't believe that you can shoot thousands and thousands of rounds without cleaning. My motto has always been, If you take care of it...then it'll take care of you.

So far, my Glock has been super reliable and I trust it with my life.

Amen!
 
I have all of my great grandpa's guns. None of them are Glocks but a good gun doesn't wear out.

:D

tk
 
I've seen a fe kbs! but not any that have been worn out...IMO, between the simplicity & the durability of these guns, they really do seem like the TIMEX of guns.
 
"tits up"? :neener: What's that?

Anyhow, I have read articles about Glocks running over 250,000 and going strong! Every manufactured item has a useful life, but there is no way you can bust your Glock in 50,000 rounds. If you did, I am confident that Glock would fix it for you.

Think about it, if you can afford to fire 50,000 rounds of 10MM, the cost of a new receiver wouldn't bother you. Let's do the math...50,000 rounds, divided by 50 rounds per box, equals 1,000 boxes of ammunition. So, 1,000 boxes of ammunition, times $20.00 per box, equals $20,000.00!!! Who cares about a cheap $475.00 pistol breaking.

Best of all, when a Glock part breaks, it usually cost what, $3.00 for the part? :)
 
We're having a discussion over at another forum regarding firearms longevity - you know, what would you leave to your great-grandchildren kind of thing.

One of the guys made the following comment, which put a new spin on Glocks for me - I'm curious to see what you guys think.

I`m in the plastics business, have been for 18 years now.

With that being said, I`ll tell you point blank that a polymer based pistol starts deteriorating from day 1 of it`s life. Yes, it has a long lifespan, prolly 20+ years with some of the "modern" polymers and additive packages, but I`ll be damned if I`ll shoot a polymer framed pistol after a 100yr life. There is NO amount of anti-oxidant or UV blocking additive that you can put in a polymer that will keep it from degrading and allow it to live as long as steel with regular use and reasonable care.

Yes, the glocks are safe now and will be for many years. I seriously doubt I`ll be here to see what y`alls great-grandchildren say about yer deteriorated family heirloom glock, but I`ll bet they`ll still be praising 1920`s vintage 1911`s

Hell will freeze over 10 times before I buy a polymer based pistol, and that`s how I`ve made a living and been able to afford steel pistols. Go to the appliance repairman`s house and look at his appliances if you want good advice
Click to expand...
 
He does have a point about plastics and UV light. But we see quite a few 20-30 year old cars with plastic interiors (constantly exposed to UV light) that hold up well.
I don't think UV light deterioration is a worry, unless you leave the gun constantly exposed to sunlight. I'd reckon few of us do that.

Even though I am a Glock enthusiast...I really don't see them as collectables. For one thing, there's no rarity about them.
Great tools for self defense and warfare though.

And...everything starts deteriorating...metals, people.

So, I just don't see his point...
 
Seriously fellas, as long as the Glock is maintained I do not know how you would wear one out by simply firing it? I have 10,000+ in my G23 and I replaced the recoil spring (it came with my new lasermax sight)... so I probably would not have even done that had it not been an upgrade because it too is still stiff so I put it in the box as a just in case now. And in the past 7 years and 10k+ rounds not one missfire, missfeed, missnothing. It hits the target. My dad is even a believer in the Glock now and he has only trusted and shot revolvers since the 1940s... that says something.

I have pics and seriously it looks BRAND NEW. When I mean brand new I mean I lay it in my glock factory box and it looks NIB.... And thats after 10,000+ rounds. You cannot wear these bad boys out without some MAJOR abuse and even then, I am not so sure. My Berreta Brigadier Elite has 200 rounds (maybe) through it and the bluing is coming off... its just not the same :( I have never carried the Berreta but have carried the Glock. I think it just has to do with the elite parkerized finish that the Austrian company puts on and high quality parts it puts into them. :D

And on the side note I just read about plastic... High impact aircraft quality plastic is fine for a firearm stock or lower.... It does accompany most service anything firearms because of its durability and inclement weather capabilities.... sunlight, rain, humidity, whatever. Thats why we use it in the Military :D Not sure if thats even a valid arguement as it is a para-military firearm at heart. So I can see how it would scare some of the "1911 only club fans" but thats ok.. I have a 1911 too hehe :D

Just wish one thing... they were made in the US so I would have one more thing to brag about.. but hey I am not complaining! I love my Glock 100% hands down :D

Happy 4th of July!
 
I won't discount that glocks are reliable, I think they are excellent firearms, although I have no desire to own one (I'm an M&P guy)

However, I saw this sig the other day and I've been dying to use it.
Thanks to Professor K....

"However, in just a few minutes a Glock fanboy will come by and post a link to a test where a Glock was put in a blender filled with Drano, sulfuric acid, Coca-Cola, pirahna, and 2 pounds of industrial diamonds. A CAT D8 bulldozer was then dropped on it from 1000 feet. The owner picked up the Glock, chambered a 155mm HE round, hit a post-it note at 917 miles, and then proceeded to run 726,761 rounds of Wolf ammo coated with Gorilla Glue with no failures.

-Jorg"

LOL

Justin
 
Isn't the polymer used in Glocks fairly new (~20 years or so)? Maybe if you left your receiver out in direct sunlight for 20 years it would start to deteriorate but all the 1st gen receivers I've seen look as good as the new ones. I'll change my mind if I have one crumble in my hands but they seem awfully durable.
 
"However, in just a few minutes a Glock fanboy will come by and post a link to a test where a Glock was put in a blender filled with Drano, sulfuric acid, Coca-Cola, pirahna, and 2 pounds of industrial diamonds. A CAT D8 bulldozer was then dropped on it from 1000 feet. The owner picked up the Glock, chambered a 155mm HE round, hit a post-it note at 917 miles, and then proceeded to run 726,761 rounds of Wolf ammo coated with Gorilla Glue with no failures.
Click to expand...

I see you read about my torture test. I believe I used Rhino Glue, though. I could try again with Gorilla Glue but its such a pain to lift the CAT D8 to 1000 feet--not sure its worth it. :D

(I actually don't even own a Glock--just really liked your post)
 
Great popints if accurate as stated. However, I purchased my Glocks for CCW. They never see the light of day. They are either under my clothes, or in a vault. The courses I take are all indoor, and at night. So, sunlight? No biggie.

But, my Glocks are for me, not my daughter, and they are my "beaters". I leave them in my vehicle when on campus, dropped into a steel vault that is permanently affixed to my truck's frame. :) I cannot bring myself to beat-up one of my 1911s. :cuss: Never gonna happen.

So, what does the future hold for my Glocks? Who cares. I use them now, not 20 years from now. It they melt-down some day, I still have my BHP, and my 1911s. If worried about long-term implications, buy an extra receiver (Tupper Ware) and seal it in an air-tight bag, then stick it in the freezer.

Doc2005
 
seal it in an air-tight bag, then stick it in the freezer.
Click to expand...
Maybe Rubbermaid will get in on the action and start making dishwasher safe, disposable glock receivers to keep us happy for years to come :p
 
Nope, not worn out, but I DID break a frame rail on one of the "non-recall" E-series guns in 9mm. That was ballpark about 7500 rounds or so, rough estimate.

Now I have this brand-new Glock, same as my old Glock, with under 500 rounds through it. I have to start trying to wear it out all over again! :neener:

Seriously, the only way I could possibly wear this thing out is to shoot it like it's one of my .22s for the next 20 years. That is 200-300 rounds a week, approximately. Anybody willing to sponsor an ammo supply? ;)
 
What? The plastic fantastic breaking?? My bet is that steel would last MUCH longer. Again, I wonder how many glocks will be around in a hundred years!
 
There is a company that makes STS and aluminum receivers for Glocks. :)

Doc2005
 
I see you read about my torture test. I believe I used Rhino Glue, though. I could try again with Gorilla Glue but its such a pain to lift the CAT D8 to 1000 feet--not sure its worth it.

(I actually don't even own a Glock--just really liked your post)
Click to expand...

I don't know why you stopped with the D8 Cat; if you really, REALLY wanted to torture test the glock, you would use the Cat D11R CT, with an operating weight of 248600 lbs vs. 84850 lbs of the D8........

Justin
 
Since no one seems to beat the lifetime test, how many rounds can this thing go without a single TOUCH of cleaning, not even whiping that sucka down.

Basically you get the gun, shoot 100 rounds, break it in. do a entire dissasembly, clean thoroughly, lube up all parts, put it together and see how long the show lasts.

If I do buy one, I will do this, just to see. I'll bring it home every time from the range, and just leave it until next time. lol, it'll be interesting.
Oh yea, using remington UMC ammo, the dirtiest **** out there.. :p
 
High Impact Polymer Plastic is not bio-degradible, rust? forget it, durable? you bet. My M16 High Impact Polymer Plastic stock stood some sun in Iraq.... a few times more than I cared to be in 130+ heat and I didnt notice any problems (with the gun) hehe. I am not worried about my lower reciever of my Glock :D

But, my Glocks are for me, not my daughter, and they are my "beaters". I leave them in my vehicle when on campus, dropped into a steel vault that is permanently affixed to my truck's frame. I cannot bring myself to beat-up one of my 1911s. Never gonna happen.

So, what does the future hold for my Glocks? Who cares. I use them now, not 20 years from now. It they melt-down some day, I still have my BHP, and my 1911s. If worried about long-term implications, buy an extra receiver (Tupper Ware) and seal it in an air-tight bag, then stick it in the freezer.
Click to expand...

Oh and the gentlemen that uses a Glock as his beater, though his comments are disturbing and arguement vague, it is a testimate to the functionability of the firearm vs all others..including his beloved 1911s.. hehe

I LOVE MY GLOCK!
images
 
Status
Not open for further replies.

Similar threads

4
  • Locked
Wore out Glock or H&K?
Replies
1
Views
488
HSMITH
H
T
  • Locked
Micro Desert Eagle question
Replies
5
Views
487
kokapelli
K
TTv2
  • Locked
10mm Glock or Rock Island?
2 3 4
Replies
75
Views
18K
Mowgli Terry
Mowgli Terry
W
  • Locked
Glock 29 Conversion - Help
Replies
6
Views
3K
RustyShackelford
R
The Evangelist Cowboy
  • Locked
.40 in a 10mm Glock
Replies
15
Views
3K
JohnKSa
JohnKSa
Back
Top