Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Finding small parts for CZ-82 (83)

Discussion in 'Handguns: Autoloaders' started by Aka Zero, Dec 22, 2008.

Thread Status:
Not open for further replies.
  1. Aka Zero

    Aka Zero Member

    Joined:
    Jul 23, 2008
    Messages:
    551
    Location:
    Missouri
    So in my pursuit of repainting my CZ-82 I almost didn't mess anything up.

    Gun apart, all the little pins stuck on cardboard, labeled. Painted, polished the parts I wanted polished, Put it together, mostly. Got everything up to a certain point, then realized the main spring strut will not go in from the bottom. So had to take everything back apart. And THEN I lose something.

    Was the sear spring. Tiny little thing that gave me tons of trouble because it didn't want to sit right in the first place.

    Anyway, Been looking around. And can't find A place that sell that, or a full spring pack for 82, 83. I would like getting a full set of things, trigger spring had a little rust on it, And I like things new.

    Any good sources for these parts? Or will I have to move everything out of my room and go on a search for a spring. (already looked for like 30 minutes.)
     
  2. orchidhunter

    orchidhunter member

    Joined:
    Jan 20, 2008
    Messages:
    237
    Aka Zero, Try CZ for the parts. I bet you want take it apart anymore. They are very hard to get back together. good luck, orchidhunter
     
    Last edited: Dec 22, 2008
  3. Aka Zero

    Aka Zero Member

    Joined:
    Jul 23, 2008
    Messages:
    551
    Location:
    Missouri
    Hard to put together.... not really. But tricky yes. trigger and the auto safety/sear assembly was a huge pain.

    But it's re painted, so I won't have to do it again for another 20 years.
     
  4. orchidhunter

    orchidhunter member

    Joined:
    Jan 20, 2008
    Messages:
    237
    Aka Zero, Go to the Makarov forum on Gunboards or the P64 forum and look for Normsutton he makes springs, and knows alot about all the Eastern Block pistols. orchidhunter
     
  5. Aka Zero

    Aka Zero Member

    Joined:
    Jul 23, 2008
    Messages:
    551
    Location:
    Missouri
    Might have to do that. Does CZ have a website to order parts. Only one I found all the prices were in gbp / euro.
     
  6. orchidhunter

    orchidhunter member

    Joined:
    Jan 20, 2008
    Messages:
    237
Thread Status:
Not open for further replies.

Share This Page