Tried first 9MM reloads today in my P89 Ruger and some failed to fire,eject,and move slide open after last round fired. I had some White Box along to compare to the reloads and they worked good and had more punch.
Used a Lee turret loader with Auto Disk Powder Measure. The instuctions with the Lee dies said for the Unique powder I'm using start grs. at 5.1 and use Auto Disk feed measure hole .53. The instuctions also say don't excede 5.5 grs.
I pulled one of the WB rounds bullets and the powder is real fine compared to Unique and the charge is about a half grain more than the unique charge I used. Also my crimp was more than the WB.
Should I try a different powder or go more grains with the Auto Disk measure. The next higher measure hole is .57.
Used a Lee turret loader with Auto Disk Powder Measure. The instuctions with the Lee dies said for the Unique powder I'm using start grs. at 5.1 and use Auto Disk feed measure hole .53. The instuctions also say don't excede 5.5 grs.
I pulled one of the WB rounds bullets and the powder is real fine compared to Unique and the charge is about a half grain more than the unique charge I used. Also my crimp was more than the WB.
Should I try a different powder or go more grains with the Auto Disk measure. The next higher measure hole is .57.