Girsan MC 14T .380 Tilt Barrel Pistol

[PCFlorida]

Do they take Beretta 84 mags? I’ve heard Girsan says they don’t but I’ve also heard that they do. Have you tried it yet?

I was pretty sure I had tried it already but just went out with two Beretta 84 mags and two Girsan mags and they worked interchangeably with all 4 mags on both platforms. So you (and I) should be gtg.

 

[Jim Watson]

Nah dude I mean like add a thicker case and supported case head, just to squeeze an extra 1-300 fps.

Buffalo Bore will cheerfully sell you some .380 +P in spite of the fact that this is not a SAAMI specification.
They claim 90 grain JHPs at 1200 fps, 100 gr cast at 1150.

 

[Riomouse911]

Looks cool!

There was an older man shooting in the lane next to me yesterday who had limited strength and at kne point needed help reaching his auto. (He did shoot ok though .) A tilt up barrel like the Girsan .380 would possibly help someone like him out.

If we could only get one here behind the cannabis-and-fluff curtain that shields the Republik from sanity.

Stay safe.

I just saw my post says “reaching” , it should say he needed help “racking” the gun.

One of the RSO’s helped him out.

Stay safe.

 

[Steven_Seagull]

Buffalo Bore will cheerfully sell you some .380 +P in spite of the fact that this is not a SAAMI specification.
They claim 90 grain JHPs at 1200 fps, 100 gr cast at 1150.

That's stupid fast for a .380, very impressed!
Thank you for that!

 

[PCFlorida]

So I'm looking to replace my Sig P365, at least until the Doc's figure out what is wrong with my nerves on the left side. The problem is not shooting it, the problem is I can't replace a magazine or rack the slide if I have a bad round or if I shoot to slide lock. I would have to shift the gun to my left hand in order to do that. Currently I am looking at a Bersa thunder plus which actually is fairly easy to cycle the slide on, I have ordered some night sights from Amazon. I have been shooting the heck out of the Bersa with no problems, practice and carry ammo.
I am also considering the Girsan MC 14T .380 tilt barrel pistol, which is why I posted here as this is my purpose for the tilt barrel. I've been shooting that as well again with no problems. The only issue I see is replacing the front site, I will have to take that to my gunsmith to do that work. More to come I'm sure.

​