tkthorn
Member
DUDE... How many Mosins you have owned is beside the point. I know what I know, I can get one for under 100.00 at the Dayton gun show and if that is what you have to pay for one then sorry about your luck.
"a dime a dozen" Simply a phraseThe more you repeat a lie, it becomes the truth, right? Knock that back up another 50% and you have current market price. $200 and up gets you a carbine. $275 and up gets you a Finn. You might not value a Mosin, and that is fine by me. But the market, which drives all things, establishes real value - and dime-a-dozen they are n
They range from around $90 to $110 around here.There are no such thing as $89 Mosins anymore. $129 is as cheap as I have seen.
No, it seems you're trying to justify the "dime-a-dozen" moniker.
Reality is what it is, and I merely point it out. The guys who actually do Mosins in Houston disagree with your assessment of an eighty buck rifle. $119.99 is most certainly under $120, I'll agree. But that ain't an eighty buck rifle. Still off by 50%. And most Mosins aren't a dime-a-dozen. Most Mosins come in at significantly more than that.
I wouldn't put a lot of above mentioned guns in the same class as a Mosin. If they were they would be easier to obtain and cost $100.00. I guess the question is what guns are ok to bubba?Legit gun smithing to a Mosin would be to repair a broken extractor or replacing other parts that are worn or broken. Modifying the gun in a way beyond its design is the work of bubba.
You can do it, it is your own property while you live, but then you move on and it remains.
Do you recommend doing the same on a K98k or Swedish Mauser? How about chopping and painting a 30-40 Krag or perhaps a Winchester 1895 in 7.62x54? What about converting a Brown Bess to percussion and changing the barrel out to a rifled one and then mounting glass on it to make it modern enough for adequate black powder hunting? I think taking a 1917-made Colt 1911, flaring the ejection port, milling out the old sights and replacing them with tritium-inserts, adding a screw-on rail for lasers or lights, and replacing the grip safety with a beaver-tail would also update it to modern specs, right? These are all the same kind of thing.