Well we had a good range session with the AK 47 today. The rifle is an Arsenal SLR 107FR made in Bulgaria. We have topped this off with a KVAR SM 13 mount, scope is a Leupold Mark AR MOD 1 1.5-4 X20 with green firedot SPR reticle.
View attachment 792467
The ammunition used is some Russian 123 gr. FMJ L.CB. Lacquered steel case, non corrosive Berdan primed ammo.
The first two sighters at 50m were touching and a few inches low. I moved the scope up and went to 200 yds. After firing a group I observed only one shot on paper at the very bottom. Using that as a benchmark I adjusted the scope accordingly and fired this three shot group at 200yds.
Shooting the thick reticle on this scope along with relatively low power, a 3" circle was basically completely obscured. Observing the 3 shot group being approx 2" left, I adjusted the scope and was able to make 5 consecutive hits on an 8" plate at 200 yds.
I would like to know your thoughts on current replacement trigger groups!
View attachment 792467
The ammunition used is some Russian 123 gr. FMJ L.CB. Lacquered steel case, non corrosive Berdan primed ammo.
The first two sighters at 50m were touching and a few inches low. I moved the scope up and went to 200 yds. After firing a group I observed only one shot on paper at the very bottom. Using that as a benchmark I adjusted the scope accordingly and fired this three shot group at 200yds.
Shooting the thick reticle on this scope along with relatively low power, a 3" circle was basically completely obscured. Observing the 3 shot group being approx 2" left, I adjusted the scope and was able to make 5 consecutive hits on an 8" plate at 200 yds.
I would like to know your thoughts on current replacement trigger groups!