frontiergander
Member
Well, After a week solid of thinking, It was time to purchase a new side hammer to replace my "old" one that was getting a little to heavy for me in the mountains.
I decided to go and get the St.Louis Hawken .50cal kit. Why .50cal? I am lucky to hunt Colorado big game every 2 -3 years depending on what I am putting in for. Our draw system really stinks, but what can you do? Besides to hog hunting in Oklahoma with a good buddy!
Also, Due to the fact I don't get to hunt every year for deer or elk, the .50cal round ball is perfect for target shooting. Super easy recoil, cheap to cast or even to buy, and basically, if I ever need to use a conical, a .50cal is the way to go due to the market being FULL of .50cal projectiles.
After a long search, I ended up at Muzzle-loaders and after some more time of looking around online for the best prices, they won and I put in a call and it was out on the truck that evening! Also got online and ordered a Birchwood Casey stock finish kit, along with cleaning patches I know I will need, and a bottle of their Rusty Walnut stain. I plan on using their Walnut and Rusty walnut stains to help pop the figure and add a nice fire like glow. That is of course unless I change my mind as I normally do!
This kit ran $318 + $8 shipping. Some places wanted MORE for a kit, than Muzzle-Loaders wanted for the factory built rifles!
Why a kit? Simply because I can control the quality of the finished product, but add my own personal touches such as stain, stock finish, barrel finish and of course, the modifications I will be doing!
I got most of the hard stuff finished yesterday. Inletting the trigger guard wasn't bad as long as you have the tools and patience. Nose cap was super easy and now sits flush with the wood. Burr removed from butt plate and nose cap. Had to remove a little wood in the barrel channel, easy with a scraper.
Biggest issue is plastic sights that SCREW on to the barrel. No dovetail! I'll most likely cut one out later today or tomorrow. Just taking my time and enjoying and taking pictures as I go.
I decided to go and get the St.Louis Hawken .50cal kit. Why .50cal? I am lucky to hunt Colorado big game every 2 -3 years depending on what I am putting in for. Our draw system really stinks, but what can you do? Besides to hog hunting in Oklahoma with a good buddy!
Also, Due to the fact I don't get to hunt every year for deer or elk, the .50cal round ball is perfect for target shooting. Super easy recoil, cheap to cast or even to buy, and basically, if I ever need to use a conical, a .50cal is the way to go due to the market being FULL of .50cal projectiles.
After a long search, I ended up at Muzzle-loaders and after some more time of looking around online for the best prices, they won and I put in a call and it was out on the truck that evening! Also got online and ordered a Birchwood Casey stock finish kit, along with cleaning patches I know I will need, and a bottle of their Rusty Walnut stain. I plan on using their Walnut and Rusty walnut stains to help pop the figure and add a nice fire like glow. That is of course unless I change my mind as I normally do!
This kit ran $318 + $8 shipping. Some places wanted MORE for a kit, than Muzzle-Loaders wanted for the factory built rifles!
Why a kit? Simply because I can control the quality of the finished product, but add my own personal touches such as stain, stock finish, barrel finish and of course, the modifications I will be doing!
I got most of the hard stuff finished yesterday. Inletting the trigger guard wasn't bad as long as you have the tools and patience. Nose cap was super easy and now sits flush with the wood. Burr removed from butt plate and nose cap. Had to remove a little wood in the barrel channel, easy with a scraper.
Biggest issue is plastic sights that SCREW on to the barrel. No dovetail! I'll most likely cut one out later today or tomorrow. Just taking my time and enjoying and taking pictures as I go.