Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H&R 929 Mainspring

Discussion in 'Handguns: Revolvers' started by cruiser00, Nov 12, 2012.

Thread Status:
Not open for further replies.
  1. cruiser00

    cruiser00 Member

    Joined:
    Mar 7, 2012
    Messages:
    2
    My 929 has the mainspring with the plastic end and the plastic is broken. Numrich has this one and the one with the steel end. Do I have to use the one with the plastic end or will the one with the steel end work as well?
     
  2. 1madss

    1madss Member

    Joined:
    Aug 10, 2011
    Messages:
    117
    I have a 999 that I replaced the plastic version of the main spring follower with the steel. It works fine.
     
  3. cruiser00

    cruiser00 Member

    Joined:
    Mar 7, 2012
    Messages:
    2
    It's just that the mainspring for the 929 looks longer on the steel version. Has anybody ever switched from the plastic on the 929?
     
  4. Remllez

    Remllez Member

    Joined:
    Mar 9, 2011
    Messages:
    980
    Cruiser,

    I've replaced the plastic ends with the steel version but never saw an assembled mainspring like you describe. If the product description states the part will fit your gun it's worth a try, if it fits .....your gun works.
     
  5. TennJed

    TennJed Member

    Joined:
    Sep 26, 2010
    Messages:
    3,454
    I replaced the broken plastic on on my 949 with the metal one from Numrich. It was a little harder getting it to set in place, but one i did it works fine
     
Thread Status:
Not open for further replies.

Share This Page