Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H&R Topbreak -- Price Check

Discussion in 'Handguns: Revolvers' started by Dain Bramage, Jul 25, 2008.

Thread Status:
Not open for further replies.
  1. Dain Bramage

    Dain Bramage Member

    Joined:
    Jan 2, 2003
    Messages:
    1,237
    Location:
    Arlington, WA
    My local shop has a cute little H&R Topbreak revolver in .32 S&W. The barrel looks to be about two inches long. It seems to be in really good shape. Bluing is probably 95%+ with only a light dragline across the cylinder. There was no mechanical slop anywhere. It looks like someone fired a few rounds and put it away for good.

    The trigger pull is a bit stiff, with the single-action possibly worse than the double-action, if you can imagine such a thing. It might just be perception based on my expectations. The serial number is 4993XX. The shop is asking $210 and is throwing in a holster and one box of ammo. What do you guys think? Does anybody know the year of manufacture?
     
  2. Old Fuff

    Old Fuff Member

    Joined:
    Dec 24, 2002
    Messages:
    23,908
    Location:
    Arizona
    They were made from the mid-1890's to just before World War Two. In general the quality was so-so, and those made before 1910 probably shouldn't be fired with smokeless powder ammunition. .32 S&W cartridges are available, but often hard to find. They made two sizes, a 6-shot on a .38 frame, and a 5-shot on a smaller one. Also both were made in conventional hammer and hammerless styles. I presume the one you are looking at is a 5-shooter. At $210 I'd say the price is a bit stiff, but there is some collector interest in examples that are in the condition you describe. For about $50.00 more you can find similar Smith & Wesson's that are much better quality.
     
  3. Dain Bramage

    Dain Bramage Member

    Joined:
    Jan 2, 2003
    Messages:
    1,237
    Location:
    Arlington, WA
    Thanks for the update! I know nothing about these revolvers, but the nice condition caught my eye.

    It was the five-shot version, and it was a bitty little thing. I consider myself a Smith man, so I'll keep looking. Are the I-frame Smiths comparable in size?
     
  4. Old Fuff

    Old Fuff Member

    Joined:
    Dec 24, 2002
    Messages:
    23,908
    Location:
    Arizona
    No, the I-frame was the same as a shortened J-frame. The cylinder was only 1.750" long and the frame was about 1/4" shorter.

    Smith & Wesson .32 top-break revolvers were the same size as the H&R you have under consideration.

    To gain more insights visit: www.armchairgunshow.com
     
Thread Status:
Not open for further replies.

Share This Page