help with cz

[gerrardlewis]

I bought a cz-75bd as my first autoloader. I bought some promags to go with it but they wouldn't come out of the gun when i hit the mag release. I checked online and saw these guns are equipped with a brake. so i removed the brake from the gun and flattened it a little. well because of the design i couldn't get the brake back in, so i removed the hammer and hammer strut thinking i could reassemble from the top. well the sear pack slipped and all the parts came apart. now i have a handful of small parts the i didn't intentionally disassemble so i have no clue how this all goes back together. and i still have no idea how the brake goes back in. i have built ar-15's before so i am a little competent but i am up the creek on this, any websites showing how this all goes back together?

 

[gerrardlewis]

alright i got the hammer spring, brake and that stuff back together. i got the decocker parts in alignment. i just need a diagram showing which parts the springs apply pressure to

 

[armoredman]

Whew, you do like to jump in with both feet, doncha! Go to czforum.com to the home gunsmithing section and ask there. I leave gunsmithing to the professionals, myself.
As for ProMag, absolute junk, stick with factory or MecGar magazines.

 

[gerrardlewis]

thanks, there was a picture that showed what i needed to see its all back together now