Hogdon Powders ?
- Thread starter area51
- Start date
- Status
KansasSasquatch
Member
That depends on where you look and how often you look. Everything is still hitting the shelves (except Universal Clays), but a lot of it just isn't staying there for long.
plmitch
Member
Local shop has some, where are you located?
Lots of titegroup out there. Everyone I know who uses it [and that includes me] has been able to find it. I've seen many others too. I just recieved 16lbs of HP38 too. I've heard rumors of a fire in Australia where they make several powders including Universal and Clays. Don't know if its true or not.
I like Hogdon powders too. I think they are the best and are always a good value.
I like Hogdon powders too. I think they are the best and are always a good value.
TfflHndn
Member
Recob's has Longshot, which I am really developing a liking for. Give it a try if you use some of the slower-burning pistol powders.
Crashbox
Member
This.
The powders seem to barely have enough time to sit squarely on the shelves before they are plucked. Just a few weeks ago I was at a Cabela's and they just happened to be stocking the shelves of powder; there were several people crowded around said shelves, including myself. I was fortunate indeed to have snagged two pounds of Benchmark...
Rem700CDLSF3006
Member
- Joined
- Dec 7, 2012
- Messages
- 282
jmr40 where did you find your H4350
buck460XVR
Member
- Joined
- Feb 6, 2007
- Messages
- 10,083
Around here most are back....if not, their Winchester/IMR equivalent are.
Kurastduuks
Member
We've got plenty of powder and primers but still low on brass...bullets are trickling back in
morcey2
Member
One of the LGSs has a bunch of Hodgdon, IMR, and Winchester powders in stock most of the time. The only one I'm looking for at the moment is H4895. I've been able to find IMR-4064, Clays, H4350, and HP-38 which covers 99% of what I load.
High Plains Drifter
Member
Try Midsouth, Graf & Sons or Lohmans, http://www.lohmanarms.com/, got some Power Pistol from them after a few weeks wait.
oneounceload
member
Hodgdon powders made in Australia will be unavailable until sometime in 2014 - there was a fire
FrankB1948
Member
Is CFE 223 one of the powders made in Australia?
KansasSasquatch
Member
It only effected the 3 Clays powders and some suppliers are even saying it's only Universal Clays (AP70N in Australia) that's being effected. Nothing else. There's several of Hodgdon/IMR/Win branded powders that are made in Australia still showing up on shelves and websites.
KansasSasquatch
Member
It might be, I could go downstairs and check my keg of it. But I won't. Even if it is that won't make a difference in the availability of it. The production of it hasn't been hindered.
PhotoBiker
Member
Any particular powder(s)?
I see a lot of Hodgdon powders at gun shops. I even scored 2 lbs of Varget and 3 lbs of BL-C2 in the past week.
Now IMR 4895 is a tough one to find...
I see a lot of Hodgdon powders at gun shops. I even scored 2 lbs of Varget and 3 lbs of BL-C2 in the past week.
Now IMR 4895 is a tough one to find...
gahunter12
Member
A local shop here in NE Ga had H335, CFE223, HP38, and Varget last Monday. I picked up 8lb of H335. His prices on CFE223 was a little high at $28/lb.
- Status
Similar threads
