Herk30
Member
Has anyone been able to make their own modified case for the OAL guage? I am assuming they must have come up with their own threads or something sp that people can't make their own cases?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Hornady OAL guage
- Thread starter Herk30
- Start date
- Status
-
Not open for further replies.
thump_rrr
Member
I tried to figure out what the thread pitch and diameter is but I don't have a very large tap and die set to help me.
I'm sure that someone who is a machinist can tell rather quickly.
I only have 3 calibers of rifles currently so whenever I add one to the stable I order a Hornady case for it.
If you want to be even more precise measure the difference from the datum line to the base of the cartridge for both the Hornady case and a fired case from your rifle and add it to your measurement.
I'm sure that someone who is a machinist can tell rather quickly.
I only have 3 calibers of rifles currently so whenever I add one to the stable I order a Hornady case for it.
If you want to be even more precise measure the difference from the datum line to the base of the cartridge for both the Hornady case and a fired case from your rifle and add it to your measurement.
beatledog7
Member
If you knew the exact thread pattern to tap, would you have the means to align and hold the empty case exactly while you drill and tap?
- Status
-
Not open for further replies.