Info on West German Sig

Status
Not open for further replies.
P

Pupulepete

Member
Joined
Nov 24, 2011
Messages
27
Location
Southern California
A west German P226 recently appeared at the local shop. It has a few rust spots on the slide, but looks to otherwise be in good condition. $500 and I'm sure there is room to move on the price.

What's the story with these guns? Are they worth a look at that price in sub par condition? What would be a deal breaker? Could it be as simple as refinishing the slide? Anything else to be weary of on these older Sigs?

I love the sig platform and grew up during the cold war, so there is some nostalgia around the W Germany stamp. I wouldn't mind a new-to-me but different 226 if it made sence.
 
These are beginning to be collectors items, while still being a fantastic, modern defensive weapon and great shooter.

Things to look for:

Any galling on the frame slide grooves (not a problem with this gun, most are 100%, just something to look for).

Triple matching serial numbers. The frame and slide should definitely match, as should the barrel. If the barrel does not...not a big deal. But if the frame and slide serial numbers do not match...it is considered a "FrankenSig" and not very desireable.

After the above, just the same as any other gun of that vintage...look at overall condition, marks and wear.

Under $500 is a fine deal, depending on condition and matching serial numbers.

Hope this helps...and hopefully, more knowledgable member will chime in. I wanted to help, in case you needed info in a hurry.

Best
J
 
There is a flood of LE/MIL 226s, etc., coming in from Europe. Online wholesalers are dumping them from 275-450. Use your Search engines.
 
Sigs have a bad rap for thin finish. How serious is the rust? Is it through the bluing or in an area of holster wear? Does the gun have matching serial numbers as Captain mentioned? Extra magazines? Box and papers? I looked into refinishing a Sig 225 and it ain't cheap.

Although there may be cheaper 226s out there, I like being able to see what I'm buying. I did recently buy a used LE turn in 220 in .45 acp through an auction site. I bit of holster wear, but otherwise excellent. I'm not finding any 226s for $275. I'd probably jump on one at that price.

Even if you find one for $300, you gotta pay shipping and a transfer fee.
 
Numbers match. The slide is a natural color, no bluing or finish. There is some pitting and the rust is there in patches, not just a dusting. I'll probably pass and save for something in better condition.
 
Pass or offer $350 for it. It is not worth more than that in the condition you describe.
 
I had a W German 226 and unfortunately I sold it for something else I liked at the time. However, fortunately I ended up with a 220 also W German. Absolute collectors item now. Solid guns and depending on how must rust there is you should definately consider at a bargain. In fact if there is no pitting, consult a local gunsmith if he can blast away that rusting without effecting the finish- if so, buy it and restore it. Just my opinion.
 
**For $350 but it, sandblast the rust and refinish. Depending on how the pitting is, you can get it polished.
 
The P226 has been the standard sidearm issue for the US Navy Seals for a long time. From one source, they put 30,000 rounds to test them. They changed because the old Beretta slides would crack after too many rounds and fly back into the shooters faces. There is a saying something like "You're not a SEAL until you've tasted Italian steel".

That being said, the 226 is an excellent weapon. Go ahead and haggle, but realize that you're looking at a tested piece of equipment that was built to last. I have a German 2022 in .40 cal that I will never sell. My 229 is American made, but still excellent also.

Kevin Dockery was a UDT who has written five books on the Navy SEALS including one dedicated to weapons and equipment.
 
I think there are enough 226's on the market, W. German, German, and newer, that you can find one at your price and desired condition.

Might as well be picky.

I just picked up a 90's vintage, German made, SIG P228 with triple matching serial numbers in great condition. At a great price. Locally. Could not be happier.
 
I'm curious where people are finding these things for $350. The best price I've seen online is about $450, but if they are really that low I might have to divert some funds. I've wanted a P226 for years now, but neither like nor can I afford the new railed versions.
 
Sig

Different pistol I know. However Summit has some LEO trades in a 2340. Frame is marked "Made in Switzerland"

Nice pistol .40/.357 interchangable barrels, poly frame. $335. For any who might have questions; see "first Impressions."

Good luck on the 226/228
 
Yep, Summit Gun Broker is my "go to" place for used SIGs, and he's the place I found them for $450. Now... $450 for a good condition P226 from a place with a good reputation for honest appraisals is not at all bad, and it's where I'm planning to order, eventually. But I was curious if I was missing something far cheaper that I might want to at least consider.

I'm not interested in a 2340, but a 2022 is on my extended wishlist at some point.
 
I'd buy it in a heart beat.

It is one of the classic platforms around.

Here is my Sig P226

SigSauerP2262.jpg

When I bought it it looked well worn

I sent it to CCR for one of their $79 slide jobs - you can see the results.

P226's are one of my favorite Sig's

:cool:
 
Wow. Total turn of events. 226 gone and in its place a 220 W German w/ triple match numbers. Frame and internals are great, slide has some spots, but no pitting. Traded my G17 for it and 50 rounds. Broke it down - new springs, etc... I'd heard the old style trigger spring could wear on the frame, but this piece showed none of it. I'm stoked!

10-days from now the slide will be headed to CCR. Barrel and trigger are hard chromed and 90%, bore is clean. Hogue grips are still good. Slide was tight on the frame.

I think I got a smoking deal on my first .45. (it won't bring me down if you don't ;-)
 
Nice. I'll be going that route. Mary is very nice!

The trigger and barrel on this pistol are finished in hard chrome. Does that give any indication of the particular variation?
 
@dondavis3, The factory black on the frame is in great shape. It should look similar to yours when it's complete. To bad it's a two month process... In the meantime ill just use your photo for inspiration. :)
 
Status
Not open for further replies.

Similar threads

M
  • Locked
West German Sig 226 for $550
Replies
5
Views
686
makanut
M
J
  • Locked
Older West German P220 nicer than new sig's?
2
Replies
28
Views
14K
Onmilo
Onmilo
sabbfan
  • Locked
West German Sig P226
Replies
17
Views
2K
sabbfan
sabbfan
M
  • Locked
West German Sigs VS US made
Replies
22
Views
9K
wojownik
wojownik
S
  • Locked
Sig 226 Variations
Replies
6
Views
736
gc70
gc70
Back
Top