I've started loading .45 colt and have noticed a little bit of leading. Not much but some in the forcing cone and up to an inch in the barrel. I'm using Meister 250 gr. bullets that I measured at .452 inch. I slugged my barrel at .451 and cylinder at .452. My load consisted of 5.6 gr. of titegroup with winchester large pistol primers and cases. I measeure my velocity at.
Hi= 752 Lo=701 Avg=736 Es=51 Sd=15
Do I need to push the bullets faster or go to a bigger bullet?
Thanks, Flip.
Hi= 752 Lo=701 Avg=736 Es=51 Sd=15
Do I need to push the bullets faster or go to a bigger bullet?
Thanks, Flip.