Ranger99
Member
JMHO- you'll probably want to get some of
those heavy L brackets and put some screws in the wall and into the table legs
and the floor. You really don't want any
flexing when you're pulling down on the
press handle when sizing and other operations that take a good bit of pressure
A good thing would also be to find you a
piece of plate steel to bolt through on the
bottom. I have a plate and a heavy glued
piece of wood on the underside of both
of mine here and at the farm
Good Luck
those heavy L brackets and put some screws in the wall and into the table legs
and the floor. You really don't want any
flexing when you're pulling down on the
press handle when sizing and other operations that take a good bit of pressure
A good thing would also be to find you a
piece of plate steel to bolt through on the
bottom. I have a plate and a heavy glued
piece of wood on the underside of both
of mine here and at the farm
Good Luck
Last edited: