Lee pro 1000 case feeder

[Sammy23t]

Does anyone know where I can get bushing for case feeder on lee 1000 for 9mm fits at the bottom when case drops down mine is missing thanks ahead

 

[LiveLife]

Chances are you are not missing the bushing but have the large case feeder cylinder plate (TR2449A).

You need the small case feeder cylinder plate (TR2449D) for 9mm and it's $14 - http://www.titanreloading.com/small-case-feed-cylinder-and-plate?search=TR2449D

Or you can purchase the entire case feeder assembly (90659) that includes feeder/tubes/z-bar/sm slider for $18.49 - http://www.brownells.com/reloading/...87_a_7c7313_a_7c100053001_d_100053408_d_22196

 

[Sammy23t]

Thanks Bds never thought of that been loading 40sw with it so far it's fine but tried 9mm and having problems

 

[LiveLife]

You definitely need the small case feeder for 9mm and small slider as 9mm case would tilt inside the cylinder plate and bind instead of sliding under the rim of case above it.

40S&W cases use large case feeder but small slider. If you don't have the small slider (TR2449C), it may be better to order the entire assembly as small slider alone is $7.