Let's see some pocket gun pics

[AZGlock13]

I figure we could use a good pocket gun pic thread. Here's a pic of my three pocket guns in my collection. A S&W 442 J-frame (use a Mika pocket holster for it), a Walther (S&W made) PPK/S .380 (use a DeSantis Nemesis pocket holster for it) and a NAA Guardian .32ACP (also use a DeSantis Nemesis pocket holster for it):

 

[IMTHDUKE]

Mr

 

[AZGlock13]

IMTHDUKE, You just had to out class me didn't you.

Very very nice pocket guns you have there.

 

[IMTHDUKE]

Thanks....just throwing up some I enjoy.

 

[AdamSean]

I will go with the polymer side of things. Kel-Tec P-3AT in a DeSantis Nemesis and a spare magazine in a DeSantis Mag Packer.

 

[S&Wfan]

 

[Randyc74]

My 3 pocket guns

S&W Mod.442
Beretta Tomcat
Kahr PM45

 

[CPshooter]

 

[markk]

 

[denfoote]

Every day.

MK9 Elite 98

 

[DAdams]

Ok Why Not


Seecamp LWS .380


In a DeSantis Nemesis Pocket Holster


642-2 and M&P 340 both with CT 405s.


Kahr PM9

 

[krs]

or......


pockets full o guns..

 

[makarovnik]

Spring kit and shaved the finger tang off the mag.

 

[QuarterBoreGunner]

I like the lil' guns just fine.

and...

 

[AJMBLAZER]

Makarovnik, where would you put the P-64 size wise? PF9/PM9 etc or more towards the PPS size?

 

[theotherwaldo]

Here are the ones that I've carried in the past.

 

[JohnBT]

My Rohrbaugh, a little pic for a little pistol. It's about as thick as the Samsung phone.

John

 

[ladykilla]

My little ones:

Kel-Tec P11, Kel-Tec P32, NAA Mini

 

[makarovnik]

The P64 is very close to the PPK in size. I also have a Romanian Carpati in .380 that is closer to the PP. I like them both except for the double action trigger but this can be fixed with a spring kit. After shaving the P64 finger extension, I can slip it right into my front jean pocket. I am 5-8" about 200#.

Very accurate and reliable little guns and cheap too. Parts are hard to find but some parts might interchange with PPK/S parts. Anyone out there know for sure? I know the grips are different but the trigger assembly and mainspring look the same. At $150 each you could buy two and if something breaks you could probably manufacture your own internal parts (to a point).

I think there is a market for replacement parts for some of these imported pistols.