- Joined
- Jul 27, 2012
- Messages
- 36
I've been reloading PD 124gr 9mm JHP and FMJ for a long time using WW231. I've just bought some Titegroup and need to work up a load. Of course none of the manuals are going to list PD bullets so should I just use other comparable bullet's data and COAL.
I called Hodgdon and was told 4.1 to 4.4 but this certainly seems high in relation to other folk's loads that I'm reading. In addition I called PD and was given no data except the lengths on their loaded ammo is 1.100 on the JHP and 1.520 on the FMJ. I've never seen COAL recommendations of 1.520 on any powder.
Any input would be appreciated.
I called Hodgdon and was told 4.1 to 4.4 but this certainly seems high in relation to other folk's loads that I'm reading. In addition I called PD and was given no data except the lengths on their loaded ammo is 1.100 on the JHP and 1.520 on the FMJ. I've never seen COAL recommendations of 1.520 on any powder.
Any input would be appreciated.