My loading bench is complete and I need to mount my Hornady LNL AP press. I'll only be loading handgun rounds (9 and 40). From what I've seen in other bench pictures I don't need too much room on the r/h side of the press - enough for a brass tray. I'm thinking 18" would be plenty of room on the right side. Any input would be much appreciated.
I've attached a few pictures of the bench. I figure with that much lumber (top is two glued/screwed pieces of 3/4" plywood) it should be plenty stable.
I've attached a few pictures of the bench. I figure with that much lumber (top is two glued/screwed pieces of 3/4" plywood) it should be plenty stable.