nalioth
Member
This thread was started almost 2 years ago - I'd hope the OP has his answer by now.
It's only inexpensive until you borrow a buddy's magazine at the range and break a federal law by inserting it (yes the revenuers consider inserting a mag to be "assembly").WardenWolf said:Your least expensive route to get yourself down to 10 parts and legal while still allowing you a maximum of customizability is:
1. Replace the trigger group (3 parts)
2. Use a US-made pistol grip (1 part)
3. Buy replacement magazine floorplates (1 part)
That is what I did. No worries then. Use any mag you want.Your list would better serve by substituting the mag part for a gas piston.
Cobra76two said:My rifle has 5 US parts added (not including the brake which cancels itself out).
That is right in line with all I've read about compliance with AK rifles.
BUT...if you try to use that new checklist,
http://thegunwiki.com/Gunwiki/BuildAkVerifyCompliance
...which wasn't around back then...and you uncheck the 5 parts I referred to (not including the brake), it still says you need one more part to bring it down to the magic number 10.
And... if you uncheck muzzle device it suddenly brings you down to 10 (something that from my understanding was an extra thing)